Comparison of the Erosion Resistance of Silicone Rubber and EPDM Composites Filled with Micro Silica and ATH

被引：59

作者：

Ramirez, Isaias ^{[1
]}

Cherney, Edward A. ^{[2
]}

Jarayam, Shesha ^{[2
]}

机构：

[1] Inst Invest Elect, Cuernavaca 62490, Morelos, Mexico

[2] Univ Waterloo, Dept Elect & Comp Engn, Waterloo, ON N2L 3G1, Canada

来源：

IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION | 2012年 / 19卷 / 01期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Micro filler; erosion resistance; composite; inclined plane; laser ablation; silicone rubber; outdoor insulation; OUTDOOR INSULATION; DEGRADATION;

D O I：

10.1109/TDEI.2012.6148521

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The paper presents the results of inclined plane tests on ATH and silica composites of Silicone rubber (SiR) and EPDM to evaluate the effect of filler type and loading on the tracking and erosion resistance of the composites formed. The effect of test voltage on the outcome of the incline plane was also examined. A laser ablation test was also used to evaluate the various composites. A critical test voltage of 4.5 kV was shown to cause failures in samples which emphasizes the importance of testing composites at voltages above this critical level. In comparing the two test methods, both the inclined plane and laser ablation test methods showed the same order for EPDM composites of ATH and silica while the laser method showed silica SiR composites to perform somewhat better than in the inclined plane test which showed similar results.

引用

页码：218 / 224

页数：7

共 23 条

[1]

Ansorge S., 2010, CIGRE 2010, P1

[2] THERMAL EROSION OF ELECTRICAL INSULATING MATERIALS [J].

BILLINGS, MJ ;

WARREN, L ;

WILKINS, R .

IEEE TRANSACTIONS ON ELECTRICAL INSULATION, 1971, EI 6 (02) :82-&

[3]

Burditt N., 1991, METAL B PLC

[4] Thermal polydimethylsiloxane degradation. Part 2. The degradation mechanisms [J].

Camino, G ;

Lomakin, SM ;

Lageard, M .

POLYMER, 2002, 43 (07) :2011-2015

[5] Polydimethylsiloxane thermal degradation - Part 1. Kinetic aspects [J].

Camino, G ;

Lomakin, SM ;

Lazzari, M .

POLYMER, 2001, 42 (06) :2395-2402

[6] Synthesis, structure and morphology of poly (dimethylsiloxane) networks filled with in situ generated silica particles [J].

Dewimille, L ;

Bresson, B ;

Bokobza, L .

POLYMER, 2005, 46 (12) :4135-4143

[7] Modified silicone rubber for use as high voltage outdoor insulators [J].

Ehsani, M .

ADVANCES IN POLYMER TECHNOLOGY, 2005, 24 (01) :51-61

[8]

Fourmigue JM, 1995, IEEE 1995 ANNUAL REPORT - CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA, P404, DOI 10.1109/CEIDP.1995.483748

[9]

HOMMA H, 1994, IEEE 1994 ANNUAL REPORT - CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA, P373, DOI 10.1109/CEIDP.1994.591793

[10]

Iida K., 2005, INT S EL INS MAT ISE, V2, P352

← 1 2 3 →