The Influence of Injection Timing on Emissions Characteristics of a DI Diesel Engine Fuelled with Pistacia Chinensis Bunge Seed Biodiesel

被引：1
|
作者：
Xu, Bin [1 ]
Luo, Li [1 ]
Wu, Jian [1 ]
Ma, Zhihao [1 ]
机构：
[1] Henan Univ Sci & Technol, Luoyang, Peoples R China
来源：
ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5 | 2013年 / 634-638卷
关键词：
Diesel engine; Biodiesel; Injection timing; Emission; EXHAUST EMISSIONS;
D O I：
10.4028/www.scientific.net/AMR.634-638.846
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The effect of various fuel injection advance angles on the emissions of an electronically controlled, high pressure, common rail, turbocharged GW4D20 diesel engine fuelled with different pistacia chinensis bunge seed biodiesel/diesel blends has been experimentally investigated. The results indicate that brake specific fuel consumption reduces with the increasing of fuel injection advance angle, and the BSFC of blends is higher than diesel. At 25% load, CO and THC are significantly reduced compared with higher load. The CO emission increases with the increment of fuel injection advance angle. At 75% load, the CO of B10 is lowest, B20 highest. At the same speed, NOx increases with increment of fuel injection advance angle for diesel and biodiesel blends dramatically. However, NOx of blends and diesel are deteriorated at high load, but there are no obvious differences among them.
引用
收藏
页码：846 / 851
页数：6
相关论文
共 50 条
  • [1] Effect of Injection Timing on Combustion Characteristics of a DI Diesel Engine Fuelled with Pistacia Chinensis Bunge Seed Biodiesel
    Luo, Li
    Xu, Bin
    Ma, Zhihao
    Wu, Jian
    Li, Ming
    ADVANCES IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2, 2013, 614-615 : 337 - 342
  • [2] Study on Emissions of a DI Diesel Engine Fuelled with Pistacia Chinensis Bunge Seed Biodiesel-Diesel Blends
    Ma Zhihao
    Zhang Xiaoyu
    Duan Junfa
    Wang Xin
    Xu Bin
    Wu Jian
    2011 2ND INTERNATIONAL CONFERENCE ON CHALLENGES IN ENVIRONMENTAL SCIENCE AND COMPUTER ENGINEERING (CESCE 2011), VOL 11, PT C, 2011, 11 : 1078 - 1083
  • [3] Combustion characteristics and emissions of a DI diesel engine fueled with Pistacia chinensis Bunge seed biodiesel
    Ma, Zhi-Hao
    Wang, Xin
    Zhang, Xiao-Yu
    Pan, Yong-Fang
    Xu, Bin
    Wu, Jian
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2010, 28 (05): : 420 - 426
  • [4] REDUCTION OF NOx EMISSIONS BY CHANGING THE INJECTION TIMING IN A DIESEL ENGINE FUELLED BY BIODIESEL
    Kanellis, P.
    Giomataris, V.
    Domvrogiannis, A.
    Stefanidis, G.
    Savvidis, D.
    Gogos, M.
    Vosniakos, F.
    Triandafyllis, J.
    JOURNAL OF ENVIRONMENTAL PROTECTION AND ECOLOGY, 2009, 10 (04): : 1091 - 1099
  • [5] Performance, Combustion and Emissions Characteristics of a Juliflora Biodiesel-Fuelled DI Diesel Engine
    Nagappan M.
    Babu J.M.
    International Journal of Vehicle Structures and Systems, 2024, 16 (01) : 121 - 127
  • [6] Improving diesel engine performance and emissions characteristics fuelled with biodiesel
    Mourad, M.
    Mahmoud, Khaled R. M.
    Noureldeen, El-Sadek H.
    FUEL, 2021, 302
  • [7] Effect of injection pressure and injection timing on DI diesel engine fuelled with biodiesel from waste cooking oil
    Kannan, G. R.
    Anand, R.
    BIOMASS & BIOENERGY, 2012, 46 : 343 - 352
  • [8] Improving diesel engine performance and emissions characteristics fuelled with biodiesel
    Mourad, M.
    Mahmoud, Khaled R.M.
    NourEldeen, El-Sadek H.
    Mourad, M. (m.mourad@mu.edu.eg), 1600, Elsevier Ltd (302):
  • [9] Analysis of combustion and emissions characteristics of a DI diesel engine fuelled with diesel/biodiesel/glycerol tert-butyl ethers mixture by altering compression ratio and injection timing
    Cakmak, Abdulvahap
    Ozcan, Hakan
    FUEL, 2022, 315
  • [10] A review on influence of injection timing and injection pressure on DI diesel engine fuelled with low viscous fuel
    Gopinath, S.
    Devan, P. K.
    Mohan, C.
    Rao, L. R. Krishna
    Kumar, P. Lokesh
    Prasad, S. Vara
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 280 - 286
12345