Experimental study of fracture properties of interfacial transition zone by three-point bending tests on granite-mortar hybrid beams

被引：19

作者：

Ji, Heli ^{[1
]}

Yang, Xinhua ^{[1
,2
]}

Luo, Zuyun ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, Sch Civil Engn & Mech, Wuhan 430074, Peoples R China

[2] Hubei Key Lab Engn Struct Anal & Safety Assessmen, 1037 Luoyu Rd, Wuhan 430074, Peoples R China

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2020年 / 263卷

基金：

中国国家自然科学基金;

关键词：

Interfacial transition zone; Fracture property; Three-point bending test; Granite-mortar hybrid beam; SILICA FUME; SURFACE-ROUGHNESS; MECHANICAL-PROPERTIES; AGGREGATE SURFACE; BOND STRENGTH; CONCRETE; BEHAVIOR; MORPHOLOGY; TOUGHNESS; ITZ;

D O I：

10.1016/j.conbuildmat.2020.120605

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The three-point bending tests were performed on the granite-mortar hybrid beam specimens to investigate the fracture properties of the interfacial transition zone (ITZ). Their curves of load versus crack mouth opening displacement were obtained. The peak load ratio and the fracture energy ratio between the hybrid specimen and the mortar specimen with the same water-cement ratio in mortar were introduced to characterize the weak ITZ fracture properties. The effects of the water-cement ratio in mortar, interface roughness and silica fume content in interfacial agent on the peak load and fracture energy were investigated and their relations were also fitted approximately. The results showed that both the peak load and fracture energy can be significantly increased by reducing the water-cement ratio in mortar and by increasing the granite-mortar interface roughness. However, the silica fume content has complicated nonlinear effects on the peak load and fracture energy. The optimal silica fume content is about 6%, which makes the best bonding performance between granite and mortar. (C) 2020 Elsevier Ltd. All rights reserved.

引用

页数：10

共 39 条

[1] Evaluation of of various treatment methods for enhancing the physical and morphological properties of coarse recycled concrete aggregate [J].

Al-Bayati, Hanaa Khaleel Alwan ;

Das, Prabir Kumar ;

Tighe, Susan L. ;

Baaj, Hassan .

CONSTRUCTION AND BUILDING MATERIALS, 2016, 112 :284-298

[2]

[Anonymous], 1985, Materials and Structures, V18, P287, DOI [10.1007/BF02472918, DOI 10.1007/BF02472918, 10.1007/bf02472918]

[3] Effects of metakaolin and the interfacial transition zone on the diffusion of chloride ions through cement mortars [J].

Asbridge, AH ;

Chadbourn, GA ;

Page, CL .

CEMENT AND CONCRETE RESEARCH, 2001, 31 (11) :1567-1572

[4] Toughness measurement - The need to think again [J].

Barr, B ;

Gettu, R ;

AlOraimi, SKA ;

Bryars, LS .

CEMENT & CONCRETE COMPOSITES, 1996, 18 (04) :281-297

[5] Round-robin analysis of the RILEM TC 162-TDF beam-bending test:: Part 2 -: Approximation of δ from the CMOD response [J].

Barr, BIG ;

Lee, MK ;

Hansen, EJD ;

Dupont, D ;

Erdem, E ;

Schaerlaekens, S ;

Schnütgen, B ;

Stang, H ;

Vandewalle, L .

MATERIALS AND STRUCTURES, 2003, 36 (263) :621-630

[6] Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete [J].

Bui, DD ;

Hu, J ;

Stroeven, P .

CEMENT & CONCRETE COMPOSITES, 2005, 27 (03) :357-366

[7] Aggregate/mortar interface: influence of silica fume at the micro- and macro-level [J].

Caliskan, S .

CEMENT & CONCRETE COMPOSITES, 2003, 25 (4-5) :557-564

[8] Study on silica fume modified mortar with various Indian cements cured at different temperatures [J].

Chakraborty, AK ;

Dutta, SC .

BUILDING AND ENVIRONMENT, 2001, 36 (03) :375-382

[9] Loading history dependence of retardation time of calcium-silicate-hydrate [J].

Chen, Jian-Kang ;

Qian, Chen .

CONSTRUCTION AND BUILDING MATERIALS, 2017, 147 :558-565

[10] Research on the resistivity attenuation law of cementitious conductive composites induced by stress relaxation [J].

Ding, Hui ;

Chen, Jiankang .

CONSTRUCTION AND BUILDING MATERIALS, 2019, 206 (347-354) :347-354

← 1 2 3 4 →