A Study of Fiber Breakage during Compounding in a Buss Kneader

被引：13

作者：

Ville, J. ^{[2
]}

Inceoglu, F. ^{[3
]}

Ghamri, N. ^{[3
]}

Pradel, J. L. ^{[3
]}

Durin, A. ^{[1
]}

Valette, R. ^{[1
]}

Vergnes, B. ^{[1
]}

机构：

[1] MINES ParisTech, CNRS, CEMEF, UMR, F-06904 Sophia Antipolis, France

[2] Polytechs, Cany Barville, France

[3] CERDATO, ARKEMA, Serquigny, France

来源：

INTERNATIONAL POLYMER PROCESSING | 2012年 / 27卷 / 02期

关键词：

TWIN-SCREW EXTRUDERS; REINFORCED THERMOPLASTICS; FLOW; POLYPROPYLENE; DISTRIBUTIONS; DEGRADATION; LENGTH; DAMAGE;

D O I：

10.3139/217.2525

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This paper is devoted to the study of fiber breakage during compounding with a polyamide matrix in a Buss kneader. Results showed a drastic decrease of glass fiber length during compounding, typically from 3500 to 350 mu m. Fiber breakage depended on processing conditions: it increased with screw speed, but the effect of feed rate was less clear. Fiber breakage increased also with the severity of the screw profile. Characterizations of fiber length evolution along the screw profile have also been performed after dead-stop experiments. Generally speaking, fiber length evolution can be described using a modified Shon-Liu-White model, in which either the number of turns or the specific energy is considered.

引用

收藏

页码：245 / 251

页数：7

相关论文

共 50 条

[41] Characterization of polypropylene/magnesium oxide/vapor-grown carbon fiber composites prepared by melt compounding [J].

Tanoue, Shuichi ;

Uematsu, Hideyuki .

JOURNAL OF POLYMER ENGINEERING, 2022, 42 (03) :204-213

[42] Ultrasonic effects on PP/PS/clay nanocomposites during continuous melt compounding process [J].

Kim, Kyung Yl ;

Ju, Dong Uk ;

Nam, Gi Joon ;

Lee, Jae Wook .

MACROMOLECULAR SYMPOSIA, 2007, 249 :283-288

[43] Mechanical Properties of Injection-molded Natural Fiber-reinforced Polypropylene Composites: Formulation and Compounding Processes [J].

Sun, Zhan-Ying ;

Han, Hai-Shan ;

Dai, Gan-Ce .

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (05) :637-650

[44] On the coarsening of the phase morphology of PP/EVA blends during compounding in a twin screw extruder [J].

Canto, L. B. .

POLYMER TESTING, 2014, 34 :175-182

[45] Correlation between compounding sequence and the properties of glass fiber-Reinforced nylon-6,6 composite [J].

Mun, Hyung Jin ;

Cha, Sang Hoon ;

Choi, Pil Sung ;

Kim, Jae Ik ;

Ryu, Sung Hun .

POLYMER ENGINEERING AND SCIENCE, 2019, 59 (01) :155-161

[46] Study of the compounding process parameters for morphology control of LDPE/layered silicate nanocomposites [J].

Coiai, Serena ;

Scatto, Marco ;

Bertoldo, Monica ;

Conzatti, Lucia ;

Andreotti, Leonardo ;

Sterner, Marion ;

Passaglia, Elisa ;

Costa, Giovanna ;

Ciardelli, Francesco .

E-POLYMERS, 2009,

[47] A UV-Vis spectroscopic method for monitoring of additive particle properties during polymer compounding [J].

Whitaker, Darren A. ;

Buchanan, Fraser ;

Billham, Mark ;

McAfee, Marion .

POLYMER TESTING, 2018, 67 :392-398

[48] Investigation of Processability of ChainExtended Polylactides During Melt Processing Compounding Conditions and Polymer Molecular Structure [J].

Jaszkiewicz, Adam ;

Bledzki, Andrzej K. ;

Duda, Andrzej ;

Galeski, Andrzej ;

Franciszczak, Piotr .

MACROMOLECULAR MATERIALS AND ENGINEERING, 2014, 299 (03) :307-318

[49] Effect of Coal Particle Breakage on Gas Desorption Rate during Coal and Gas Outburst [J].

Cheng, Qiang ;

Huang, Gun ;

Li, Zhiqiang ;

Zheng, Jie ;

Liang, Qinming .

APPLIED SCIENCES-BASEL, 2024, 14 (01)

[50] Derivation and verification of the breakage rate coefficient during flocculation process based on shear strength [J].

Liu, Jian ;

Zhou, Min ;

Zhou, Jianhao ;

Hu, Qichao ;

He, Junguo .

MATERIALS, TRANSPORTATION AND ENVIRONMENTAL ENGINEERING, PTS 1 AND 2, 2013, 779-780 :1482-+

← 1 2 3 4 5 →