Influence of Manufacturing Variances on the Strength of Pressure Vessels: Analytical Study

被引：0

作者：

Chaitanya, Ch Sri ^{[1
]}

Rao, R. Narasimha ^{[1
]}

机构：

[1] Natl Inst Technol Warangal, Dept Mech Engn, Warangal 506004, Andhra Pradesh, India

来源：

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2020年 / 45卷 / 11期

关键词：

Pressure vessels; Classical laminate theory; Winding angle; Laminate thickness; Fibre content; Tsai-Hill failure criteria; DESIGN;

D O I：

10.1007/s13369-020-04744-8

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

The strength of composite structure is sensitive to the manufacturing variances like fibre orientation angle, thickness of the laminate and the volume fraction of fibre. In the present study, the effect of these parameters on the strength of the composite laminate and the optimum parameters for higher strength were observed using classical laminate theory. The optimum fibre orientation angle was found to be 55 degrees/- 55 degrees. The ideal thickness of the laminate is 0.2 mm and the volume fraction of the fibre in the composite is 0.53. The results of the effect of the fibre orientation angle on the strength obtained were validated using Autodesk Helius composite.

引用

页码：9413 / 9421

页数：9

共 23 条

[11] Evaluation of fiber material properties in filament-wound composite pressure vessels [J].

Hwang, Tae-Kyung ;

Park, Jae-Beom ;

Kim, Hyoung-Geun .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (09) :1467-1475

[12]

Jones R., 1998, MECH COMPOSITES MAT, V2nd

[13] Filament-wound composite pressure vessel inspection based on rotational through-transmission laser ultrasonic propagation imaging [J].

Lee, Young-Jun ;

Ahmed, Hasan ;

Lee, Jung-Ryul .

COMPOSITE STRUCTURES, 2020, 236

[14] Design optimization for filament wound cylindrical composite internal pressure vessels considering process-induced residual stresses [J].

Liu, Chao ;

Shi, Yaoyao .

COMPOSITE STRUCTURES, 2020, 235

[15] Experimental method and numerical simulation demonstrate non-linear axial behaviour in composite filament wound pressure vessel due to thermal expansion effect [J].

Nimdum, P. ;

Patamaprohm, B. ;

Renard, J. ;

Villalonga, S. .

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (38) :13231-13241

[16] Comparison between finite element formulations of active constrained layer damping using classical and layer-wise laminate theory [J].

Park, CH ;

Baz, A .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2001, 37 (01) :35-56

[17] Optimal winding angle in laminated CFRP composite pipes subjected to patch loading: Analytical study and experimental validation [J].

Tashnizi, Ebrahim Sharifi ;

Gohery, Scott ;

Sharifi, S. ;

Burvill, Colin .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2020, 180

[18] New generation of filament-wound composite pressure vessels for commercial applications [J].

Vasiliev, VV ;

Krikanov, AA ;

Razin, AF .

COMPOSITE STRUCTURES, 2003, 62 (3-4) :449-459

[19] Modal analysis for filament wound pressure vessels filled with fluid [J].

Wu, Z. ;

Zhou, W. ;

Li, H. .

COMPOSITE STRUCTURES, 2010, 92 (09) :1994-1998

[20] Stress and deformation of multiple winding angle hybrid filament-wound thick cylinder under axial loading and internal and external pressure [J].

Xing, Jingzhong ;

Geng, Pei ;

Yang, Tao .

COMPOSITE STRUCTURES, 2015, 131 :868-877

← 1 2 3 →