Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150°C

被引：15
|
作者：
Praveena, Manimunda [2 ]
Jayaram, Vikram [2 ]
Biswas, Sanjay K. [1 ]
机构：
[1] Indian Inst Sci, Dept Mech Engn, Nanotribol Lab, Bangalore 560012, Karnataka, India
[2] Indian Inst Sci, Dept Mat Engn, Ceram Lab, Bangalore 560012, Karnataka, India
来源：
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH | 2012年 / 51卷 / 38期
关键词：
TRIBOLOGICAL PROPERTIES; MOLYBDENUM-DISULFIDE; SOLID LUBRICANTS; WEAR; TEMPERATURES; DEGRADATION; MECHANISMS; PRODUCTS; FILMS; WATER;
D O I：
10.1021/ie3011337
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
A steel ball was slid on a steel flat lubricated by molybdenum disulfide (MoS2) particles suspended in hexadecane oil at 150 degrees C. The friction data is compared with that obtained when the ball was slid on the flat sprayed apriori with nominally dry MoS2 particles. The friction in the dry experiment was found to increase with temperature while the friction in wet condition was found to decrease with increasing temperature. Micro-Raman and Fourier transform IR spectroscopy are used to explore the roles of environmental moisture and chemical degradation of oil on the formation of antifriction film on the steel substrate.
引用
收藏
页码：12321 / 12328
页数：8
相关论文
共 18 条
  • [11] Improved wear resistance of AISI-4340 steel by Ti-Nb-C-N and MoS2 composite coating by cathodic cage plasma deposition
    Neto, J. F. M.
    Naeem, M.
    Lima, L. F.
    Yang, Yang
    Liborio, M. S.
    Feitor, M. C.
    Alves, S. M.
    Sousa, R. R. M.
    Iqbal, Javed
    Costa, T. H. C.
    Nascimento, R. M.
    PHYSICA B-CONDENSED MATTER, 2024, 676
  • [12] Antifriction Properties of Plasma-Chemical Coatings Based on SiO2 with MoS2 Nanoparticles under Conditions of Spinning Friction on ShKh15 Steel
    Breki A.D.
    Aleksandrov S.E.
    Tyurikov K.S.
    Kolmakov A.G.
    Gvozdev A.E.
    Kalinin A.A.
    Gvozdev, A.E. (gwozdew.alexandr2013@yandex.ru), 2018, Pleiades journals (09) : 714 - 718
  • [13] High Temperature Tribological Performance of Steel/Copper Friction Pairs Lubricated with a Modified C-WS2-(Fe3O4 + TiN) Nanoadditives in Non-Copper Coated Solid Wires
    Li, Hong
    Zhu, Jing
    Chen, Zisong
    Li, Zhuoxin
    Meng, Bo
    NANOMATERIALS, 2022, 12 (12)
  • [14] An investigation of the effect of surface roughness and coating thickness on the friction and wear behaviour of a commercial MoS2-metal coating on AISI 400C steel
    Siu, JHW
    Li, LKY
    WEAR, 2000, 237 (02) : 283 - 287
  • [15] Tribochemical Interactions between Graphene and ZDDP in Friction Tests for Uncoated and W-DLC-Coated HS6-5-2C Steel
    Kowalczyk, Joanna
    Madej, Monika
    Dziegielewski, Wojciech
    Kulczycki, Andrzej
    Zolty, Magdalena
    Ozimina, Dariusz
    MATERIALS, 2021, 14 (13)
  • [16] Structure formation processes in sintering of stainless steel-base heterophase materials. II. Structure formation processes in sintering of type Kh18N15 stainless steel-base materials with additions of Cr3C2 and MoS2
    S. G. Napara-Vologina
    L. N. Orlova
    A. A. Mamonova
    V. P. Dzeganovskii
    Powder Metallurgy and Metal Ceramics, 1997, 36 : 548 - 553
  • [17] Structure formation processes in sintering of stainless steel-base heterophase materials.: II.: Structure formation processes in sintering of type Kh18N15 stainless steel-base materials with additions of Cr3C2 and MoS2
    Napara-Vologina, SG
    Orlova, LN
    Mamonova, AA
    Dzeganovskii, VP
    POWDER METALLURGY AND METAL CERAMICS, 1997, 36 (9-10) : 548 - 553
  • [18] Research of the effects of laser power variation on the properties of laser cladding Ni45/Cr3C2/MoS2 self-lubricating wear-resistant coatings on the surface of 300M ultra-high-strength steel
    Wang, Peng
    Zhang, Yan-hui
    Pang, Ming
    Gao, Liu-hua
    JOURNAL OF MATERIALS SCIENCE, 2024, 59 (29) : 13558 - 13574
12