Photocatalytic activity and photoluminescence properties of TiO2, In2O3, TiO2/In2O3 thin films multilayer

This study evaluated the effect of crystallization temperature (300, 500 and 700 A degrees C) on the photocatalytic and photoluminescent properties of the multilayer thin films of TiO2, In2O3 and TiO2/In2O3 which were prepared by the Complex Polymerization Method (CPM) and deposited on substrates of Si (100) by the spin coating method. The results of X-ray diffraction (XRD) revealed that there was no chemical interaction between the oxides (TiO2/In2O3) in crystalline films. The morphology was observed by atomic force microscopy (AFM) with a mean grain size of 15-35 nm. The result showed that the photocatalytic property is significantly increased by increasing the crystallization temperature. This is due to the agitation of the molecules which facilitates the transfer of charge between the electron and the catalyst bore. UV-vis light absorption spectra indicated that the addition of In2O3 in TiO2 films is an effective way of increasing the uptake of TiO2 in the visible region up to similar to 600 nm for photocatalytic applications, it was also possible to observe that these films could be easily Recycled for reuse. The samples were also characterized by photoluminescence, where it was possible to observe that the reduction of the PL intensity increased the photocatalytic activity of the thin films, with the increase of the crystallization temperature. In addition, the method used in this study is simple and economical compared to other methods.