Performance studies of energy consumption for single and multiple nozzle systems under impinging air jets

被引：14

作者：

Etemoglu, Akin Burak ^{[1
]}

Can, Muhiddin ^{[1
]}

机构：

[1] Uludag Univ, Fac Engn & Architecture, Dept Mech Engn, TR-16059 Bursa, Turkey

来源：

HEAT AND MASS TRANSFER | 2013年 / 49卷 / 08期

关键词：

HEAT-TRANSFER; MASS-TRANSFER; IMPINGEMENT; FLOW;

D O I：

10.1007/s00231-013-1137-8

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Impinging air jets of various shapes, sizes and configurations are commonly used in heating, cooling and drying industrial processes. An analytical study has been carried out to optimise the thermal performance of single and multiple nozzle systems using impinging air jets. The optimisation of the nozzle array was given for practical purposes. The results show that within practical limits, a narrower nozzle size results in a greater heat and mass transfer coefficient. An economical analysis of the drying processes is also given for slot nozzles.

引用

页码：1057 / 1070

页数：14

共 18 条

[1]

Allander C., 1961, TAPPI, V44, P332

[2]

[Anonymous], 1951, I MECH ASME

[3] The analysis of the drying process on unsteady forced convection in thin films of ink [J].

Avci, A ;

Can, M .

APPLIED THERMAL ENGINEERING, 1999, 19 (06) :641-657

[4] Performance of jet impingement in unglazed air collectors [J].

Belusko, M. ;

Saman, W. ;

Bruno, F. .

SOLAR ENERGY, 2008, 82 (05) :389-398

[5]

Can M, 2002, HEAT MASS TRANSFER, V38, P251, DOI 10.1007/S002310100249

[6] Investigation into the effect of nozzle shape on the nozzle discharge coefficient and heat and mass transfer characteristics of impinging air jets [J].

Etemoglu, A. B. ;

Isman, M. K. ;

Can, M. .

HEAT AND MASS TRANSFER, 2010, 46 (11-12) :1395-1410

[7] A brief survey and economical analysis of air cooling for electronic equipments [J].

Etemoglu, Akin Burak .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2007, 34 (01) :103-113

[8] Enhanced jet impingement heat transfer with crossflow at low Reynolds numbers [J].

Failla, G ;

Bishop, EH ;

Liburdy, JA .

JOURNAL OF ELECTRONICS MANUFACTURING, 1999, 9 (02) :167-178

[9]

Gardner T. A., 1960, TAPPI, V43, P796

[10]

GARDON R, 1966, T ASME, V88, P101

← 1 2 →