Flat lapping process with Fractal Tool Paths

被引：8

作者：

Chen, CCA ^{[1
]}

Liu, WC ^{[1
]}

Tai, KC ^{[1
]}

机构：

[1] Tamkang Univ, Dept ME, Taipei, Taiwan

来源：

PROGRESS OF CUTTING AND GRINDING: WITH SOME TOPICS IN ADVANCED MANUFACTURE TECHNOLOGY | 1998年

关键词：

D O I：

10.1145/293701.293702

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A mathematical model of lapping paths for the flat lapping processes using Fractal Tool Paths (FTP) has been developed in this paper. Past st;dies have shown the feasibility of fractal tool paths for machining and automated surface finishing processes. In this paper, the flat lapping process with the FTP is designed to rotate the workpiece by a rotating table and the lap moving with FTP. Experiments were preliminarily performed with a prototype automated surface finishing system (ASFS) using a 3-axis CNC machining center installed with a rotary table for flat lapping of workpieces. The distribution of lapping paths is strongly dependent on rotating speed of workpiece and feed rate of lap. Slow workpiece rotating speed (7.8 rpm) and high feed rate (200 mm/min) are recommended to have less overlapping density of lapping paths.

引用

页码：1 / 6

页数：6