Effect of Cooling Paths on Microstructure and Mechanical Properties of Vanadium Bearing Microalloyed Steel

被引：4

作者：

Chen, Jun ^{[1
]}

Chen, Xiangwei ^{[1
]}

Tang, Shuai ^{[1
]}

Liu, Zhenyu ^{[1
]}

Wang, Guodong ^{[1
]}

机构：

[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China

来源：

MATERIALS PERFORMANCE, MODELING AND SIMULATION | 2013年 / 749卷

关键词：

V-bearing microalloyed steel; Ultra fast cooling; Cooling path; Microstructure; Mechanical properties;

D O I：

10.4028/www.scientific.net/MSF.749.243

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Based on ultra fast cooling, effects of cooling paths on microstructure and mechanical properties of vanadium bearing microalloyed steel were investigated by the observation of optical microscope and scanning electron microscope and the testing of mechanical properties, moreover, the work-hardening exponent was determined based on stress-strain curves. The results show that using ultra fast cooling can effectively refine ferrite grain size and the ferrite grain size is decreased as the final temperature of ultra fast cooling is decreased. In addition, the microstructure and mechanical properties can be controlled by cooling paths. The ferrite-perlite microstructure with lower strength and higher n-value of approx. 0.2 and the ferrite-bainite microstructure with higher strength and lower n-value of approx. 0.16 can be gained at the higher and lower final temperature of ultra fast cooling, respectively. And the yield ratio are all lower than 0.85.

引用

页码：243 / 249

页数：7

共 8 条

[1] Strain-induced precipitation kinetics of Nb(C,N) and precipitates evolution in austenite of Nb-Ti micro-alloyed steels [J].

Chen, Jun ;

Tang, Shuai ;

Liu, Zhenyu ;

Wang, Guodong ;

Zhou, Yanlei .

JOURNAL OF MATERIALS SCIENCE, 2012, 47 (11) :4640-4648

[2]

Giinduz S., 2005, MATER DESIGN, V26, P486

[3] EFFECTS OF VANADIUM ADDITIONS ON MICROSTRUCTURE AND HARDNESS OF HYPEREUTECTOID PEARLITIC STEELS [J].

HAN, K ;

MOTTISHAW, TD ;

SMITH, GDW ;

EDMONDS, DV ;

STACEY, AG .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 190 (1-2) :207-214

[4] Effect of molybdenum on continuous cooling bainite transformation of low-carbon microalloyed steel [J].

Kong, Junhua ;

Xie, Changsheng .

MATERIALS & DESIGN, 2006, 27 (10) :1169-1173

[5]

Lagneborg R., 2000, ROLE VANADIUM MICROA, P8

[6] DETERMINATION OF RECRYSTALLIZATION STOP TEMPERATURE FROM ROLLING-MILL LOGS AND COMPARISON WITH LABORATORY SIMULATION RESULTS [J].

MACCAGNO, TM ;

JONAS, JJ ;

YUE, S ;

MCCRADY, BJ ;

SLOBODIAN, R ;

DEEKS, D .

ISIJ INTERNATIONAL, 1994, 34 (11) :917-922

[7] Chemistry and Process Optimization of V-Microalloyed N80-Class Seamless Casing Tube [J].

Pan Tao ;

Yang Cai-fu ;

Ma Yue ;

Xue Dong-mei ;

Zhang Yong-quan .

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2010, 17 (03) :72-78

[8] Research, development, and production of V-N microalloyed high strength rebars for building in China [J].

Yang Cai-fu ;

Wang Quan-li .

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2008, 15 (02) :81-86

← 1 →