Rock Crack Propagation Mechanism of Oriented Perforation Hydraulic Fracture under Different Perforation Parameters

被引:17
作者
Liu, Songyong [1 ,2 ]
Zhang, Deyi [1 ,2 ]
Liu, Hao [1 ,2 ]
机构
[1] China Univ Min & Technol, Jiangsu Key Lab Mine Mech & Elect Equipment, Sch Mechatron Engn, Xuzhou 221116, Jiangsu, Peoples R China
[2] China Univ Min & Technol, Jiangsu Collaborat Innovat Ctr Intelligent Min Eq, Xuzhou 221116, Jiangsu, Peoples R China
基金
中国国家自然科学基金;
关键词
Crack propagation; Oriented perforation hydraulic fracture; Confining pressure ratio coefficient; Perforation azimuth angle; FINITE-ELEMENT-METHOD; POROUS-MEDIA; WELLBORE; INITIATION; STRESS; ADVANCEMENT; SIMULATION; GROWTH; MODEL;
D O I
10.1007/s13369-020-04821-y
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
In order to obtain the mechanism of crack propagation of oriented perforation hydraulic fracture and its effect on mechanical properties of rock samples, an experimental study on hydraulic fracture of rock samples without confining pressure was carried out. The confining pressure ratio coefficient was defined, and oriented perforation hydraulic fracture was numerically simulated based on the extended finite element method so as to explore the comprehensive influence of different perforation parameters. The results demonstrated that the crack initiates and propagates along the direction of perforation azimuth angle, and the crack of oriented perforation is slightly wider than that of non-oriented perforation. The difficulty of crack initiation and turning increases with the perforation azimuth angle and decreases with the confining pressure ratio coefficient. Crack initiation and propagation are mainly driven by tensile stress, and the crack initiation pressure increases with the perforation azimuth angle and the confining pressure ratio coefficient.
引用
收藏
页码:8711 / 8725
页数:15
相关论文
共 36 条
[1]   Nonplanar fracture propagation from a horizontal wellbore: Experimental study [J].
Abass, HH ;
Hedayati, S ;
Meadows, DL .
SPE PRODUCTION & FACILITIES, 1996, 11 (03) :133-137
[2]  
Abass HH., 1994, SPE ANN TECHNICAL C
[3]   Hydro-mechanically coupled FDEM framework to investigate near-wellbore hydraulic fracturing in homogeneous and fractured rock formations [J].
AbuAisha, Murad ;
Eaton, David ;
Priest, Jeffrey ;
Wong, Ron .
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2017, 154 :100-113
[4]   Developing a new rock classification based on the abrasiveness, hardness, and toughness of rocks and PA for the prediction of hard dimension stone sawability in quarrying [J].
Almasi, S. Najmedin ;
Bagherpour, Raheb ;
Mikaeil, Reza ;
Ozcelik, Yilmaz .
Geosystem Engineering, 2017, 20 (06) :295-310
[5]  
[Anonymous], 2014, Hydraulic Fract J
[6]  
[Anonymous], SPE HYDR FRACT TECHN
[7]  
[Anonymous], 1972, DEV PETROL SCI
[8]   A multiaxial stress criterion for short- and long-term strength of isotropic rock media [J].
Aubertin, M ;
Li, L ;
Simon, R .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2000, 37 (08) :1169-1193
[9]  
Belytschko T, 1999, INT J NUMER METH ENG, V45, P601, DOI 10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO
[10]  
2-S