Study on tribological properties of multi-walled carbon nanotubes/epoxy resin nanocomposites

被引：76
|
作者：
Dong, B [1 ]
Yang, Z [1 ]
Huang, Y [1 ]
Li, HL [1 ]
机构：
[1] Lanzhou Univ, Coll Chem & Chem Engn, Lanzhou 730000, Peoples R China
来源：
TRIBOLOGY LETTERS | 2005年 / 20卷 / 3-4期
基金：
中国国家自然科学基金;
关键词：
epoxy resin; multi-walled carbon nanotubes; nanocomposites; tribological properties;
D O I：
10.1007/s11249-005-8637-8
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Multi-walled carbon nanotubes/epoxy resin (MWNTs/EP) nanocomposites with different MWNTs contents have been prepared successfully. The influence of MWNTs on the friction and wear behaviors of the nanocomposites was investigated by a friction and wear tester under dry-sliding contact conditions. The relative humidity of the air was about 50 +/- 10%. Contrast to pure EP, MWNTs/EP nanocomposites showed not only higher wear resistance but also smaller friction coefficient. MWNTs could dramatically reduce the friction and improve the wear resistance behaviors of the nanocomposites. The mechanisms of the significant improvements on the tribological properties of the MWNTs/EP nanocomposites were also discussed.
引用
收藏
页码：251 / 254
页数：4
相关论文
共 50 条
  • [1] Study on Tribological Properties of Multi-walled Carbon Nanotubes/Epoxy Resin Nanocomposites
    B. Dong
    Z. Yang
    Y. Huang
    H.-L. Li
    Tribology Letters, 2005, 20 : 251 - 254
  • [2] Study of properties of functional multi-walled carbon nanotubes/epoxy nanocomposites
    Zhang, M., 1600, China Machine Press (29):
  • [3] Comparative Mechanical, Tribological and Morphological Properties of Epoxy Resin Composites Reinforced With Multi-Walled Carbon Nanotubes
    Rittin Abraham Kurien
    D. Philip Selvaraj
    M. Sekar
    Chacko Preno Koshy
    K. M. Praveen
    Arabian Journal for Science and Engineering, 2022, 47 : 8059 - 8067
  • [4] Comparative Mechanical, Tribological and Morphological Properties of Epoxy Resin Composites Reinforced With Multi-Walled Carbon Nanotubes
    Kurien, Rittin Abraham
    Selvaraj, D. Philip
    Sekar, M.
    Koshy, Chacko Preno
    Praveen, K. M.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (07) : 8059 - 8067
  • [5] Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites
    Yeh, Meng-Kao
    Hsieh, Tsung-Han
    Tai, Nyan-Hwa
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 (289-292): : 289 - 292
  • [6] The impact of multi-walled carbon nanotubes on the thermal stability and tensile properties of epoxy resin hybrid nanocomposites
    Mustafa, Bakhan S.
    Jamal, Gelas M.
    Abdullah, Omed Gh.
    RESULTS IN PHYSICS, 2022, 43
  • [7] Mechanical and barrier properties of epoxy resin filled with multi-walled carbon nanotubes
    Guadagno, Liberata
    Vertuccio, Luigi
    Sorrentino, Andrea
    Raimondo, Marialuigia
    Naddeo, Carlo
    Vittoria, Vittoria
    Iannuzzo, Generoso
    Calvi, Erika
    Russo, Salvatore
    CARBON, 2009, 47 (10) : 2419 - 2430
  • [8] Thermal Properties of Multi-Walled Carbon Nanotubes - Graphite Nanosheets/Epoxy Nanocomposites
    Ramana, G. Venkata
    Padya, Balaji
    Srikanth, Vadali V. S. S.
    Jain, P. K.
    CARBON MATERIALS 2012 (CCM12): CARBON MATERIALS FOR ENERGY HARVESTING, ENVIRONMENT, NANOSCIENCE AND TECHNOLOGY, 2013, 1538 : 205 - 208
  • [9] Effect of the addition of multi-walled carbon nanotubes on the thermomechanical properties of epoxy resin
    Sul, Jung-Hoon
    Prusty, B. Gangadhara
    Crosky, Alan
    POLYMER COMPOSITES, 2017, 38 (09) : 1873 - 1880
  • [10] Studies on preparation and properties of the multi-walled carbon nanotubes (MWNTs)/epoxy nanocomposites
    Deng, Huayang
    Cao, Qi
    Wang, Xianyou
    Chen, Quanqi
    Kuang, Hao
    Wang, Xiaofeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (18): : 5759 - 5763
12345