Influence of powder characteristics in laser direct metal deposition of SS316L for metallic parts manufacturing

被引：42

作者：

Boisselier, Didier ^{[1
]}

Sankare, Simon ^{[1
]}

机构：

[1] IREPA LASER, F-67400 Illkirch Graffenstaden, France

来源：

LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) | 2012年 / 39卷

关键词：

Laser Direct Metal Deposition; LDMD; Rapid manufacturing; Additive Laser Manufacturing; Laser Cladding; 316L STAINLESS-STEEL;

D O I：

10.1016/j.phpro.2012.10.061

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Laser direct metal deposition (LDMD) is a rapid manufacturing technique, dedicated to new part construction or worn part repairing. The process depends on a various range of parameters and the powder characteristics are one of the main crucial parameters. The powder (size,.....) has then a direct impact on an optimized process behavior and the mechanical properties of the manufactured component. This paper focuses on powder investigation, for a better understanding of its influence. The work was performed with different batches of stainless steel AISI316 that have been analyzed and characterized before processing. This paper discusses the results derived from the manufactured samples, highlights the influence of the main powders characteristics and demonstrates the flexibility of the process when the powders meet the specifications. (C) 2012 Published by Elsevier B. V. Selection and/ or review under responsibility of Bayerisches Laserzentrum GmbH

引用

页码：455 / 463

页数：9

共 12 条

[1]

Dubourg L., 2002, THESIS U STRASBOURG

[2]

Freneaux O., EUR patent, Patent No. 0574580

[3]

Freneaux O., CARACTERISATION ANAL, Patent No. 5418350

[4]

FRENEAUX O, Patent No. 5418350

[5]

Jouvard Grevey D., 1997, J PHYS, VIII, P2265

[6] Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel [J].

Majumdar, JD ;

Pinkerton, A ;

Liu, Z ;

Manna, I ;

Li, L .

APPLIED SURFACE SCIENCE, 2005, 247 (1-4) :373-377

[7] Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel [J].

Majumdar, JD ;

Pinkerton, A ;

Liu, Z ;

Manna, I ;

Li, L .

APPLIED SURFACE SCIENCE, 2005, 247 (1-4) :320-327

[8] Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping [J].

Pinkerton, AJ ;

Li, L .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2003, 52 (01) :181-184

[9]

Sankare S., 2007, THESIS U STRASBOURG

[10]

VETTER PA, 1997, THESIS U STRASBOURG

← 1 2 →