Optical study for springback prediction, thickness reduction and forces variations on single point incremental forming

被引：0

作者：

Rosca, Nicolae ^{[1
]}

Oleksik, Valentin ^{[1
]}

Pascu, Adrian ^{[1
]}

Oleksik, Mihaela ^{[1
]}

Avrigean, Eugen ^{[1
]}

机构：

[1] Lucian Blaga Univ Sibiu, Fac Engn, 10 Victoriei Bd, Sibiu 550025, Romania

来源：

MATERIALS TODAY-PROCEEDINGS | 2019年 / 12卷

关键词：

single point incremental forming; punch diameter; vertical step; springback; thickness reduction; forces; experimental study;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The goal of the present work is to present an experimental study regarding the influence of the main technological influence factors such as the vertical step and the punch diameter on the single point incremental forming process (SPIF). In this paper we estimate the influence of these two factors on springback, thickness reduction and forces. Both parameters were varied on two levels: (d) punch diameter 6 and 10 mm and (s) vertical step 0,1 and 0,5 mm. The experiments were done on experimental layout composed by a robot, a clamping system that contains the die's lower part and the optical system. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：213 / 218

页数：6

共 10 条

[1] Revisiting formability and failure of polymeric sheets deformed by Single Point Incremental Forming [J].

Bagudanch, I. ;

Centeno, G. ;

Vallellano, C. ;

Garcia-Romeu, M. L. .

POLYMER DEGRADATION AND STABILITY, 2017, 144 :366-377

[2] Accuracy Analysis of Incrementally Formed Tunnel Shaped Parts [J].

Behera, Amar Kumar ;

Afonso, Daniel ;

Murphy, Adrian ;

Jin, Yan ;

de Sousa, Ricardo Alves .

RECENT ADVANCES IN INTELLIGENT MANUFACTURING, PT I, 2018, 923 :40-49

[3] Using the Analytic Hierarchy Process (AHP) and fuzzy logic to evaluate the possibility of introducing single point incremental forming on industrial scale [J].

Bologa, Octavian ;

Breaz, Radu-Eugen ;

Racz, Sever-Gabriel .

6TH INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY AND QUANTITATIVE MANAGEMENT, 2018, 139 :408-416

[4] Experimental study on force measurements for single point incremental forming [J].

Duflou, Joost ;

Tunckol, Yasemin ;

Szekeres, Alex ;

Vanherck, Paul .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) :65-72

[5] Thickness distribution and mechanical property of sheet metal incremental forming based on numerical simulation [J].

Li Jun-chao ;

Li Chong ;

Zhou Tong-gui .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 :S54-S60

[6] An investigation into thickness distribution in single point incremental forming using sequential limit analysis [J].

Mirnia, M. J. ;

Dariani, B. Mollaei ;

Vanhove, H. ;

Duflou, J. R. .

INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2014, 7 (04) :469-477

[7] Incremental Forming of Titanium Ti6Al4V Alloy for Cranioplasty Plates-Decision-Making Process and Technological Approaches [J].

Racz, Sever Gabriel ;

Breaz, Radu Eugen ;

Tera, Melania ;

Girjob, Claudia ;

Biris, Cristina ;

Chicea, Anca Lucia ;

Bologa, Octavian .

METALS, 2018, 8 (08)

[8] Incremental forming: an integrated robotized cell for production and quality control [J].

Sasso, M. ;

Callegari, M. ;

Amodio, D. .

MECCANICA, 2008, 43 (02) :153-163

[9]

2005, J MATER PROCESS TECH, V162, P156, DOI DOI 10.1016/J.JMATPROTEC.2005.02.148

[10]

2014, CIRP J MANUF SCI TEC, V7, P185, DOI DOI 10.1016/J.CIRPJ.2014.04.003

← 1 →