Modeling large strain, high rate deformation in metals

The large strain deformation response of 6061-T6 and Ti-6Al-4V has been evaluated over a range in strain rates from 10(-4) s(-1) to over 10(4) s(-1). The results have been used to critically evaluate the strength and damage components of the Johnson-Cook (JC) material model. A new model that addresses the shortcomings of the JC model was then developed and evaluated. The model is derived from the rate equations that represent deformation mechanisms active during moderate and high rate loading. Another model that accounts for the influence of void formation on yield and flow behavior of a ductile metal (the Gurson model) was also evaluated. The characteristics and predictive capabilities of these models are reviewed.