Stabilizing lithium/sulfur batteries by a composite polymer electrolyte containing mesoporous silica particles

被引:79
作者
Jeddi, Kazem [1 ]
Sarikhani, Kaveh [1 ]
Qazvini, Nader Taheri [2 ]
Chen, P. [1 ]
机构
[1] Univ Waterloo, Waterloo Inst Nanotechnol, Dept Chem Engn, Waterloo, ON N2L 3G1, Canada
[2] Univ Tehran, Sch Chem, Div Polymer, Coll Sci, Tehran, Iran
基金
加拿大自然科学与工程研究理事会;
关键词
Energy storage; Lithium/sulfur battery; Polymer electrolyte; Polysulfide dissolution; CATHODE MATERIALS; SULFUR BATTERIES; PERFORMANCE; FABRICATION; POLYACRYLONITRILE; NANOTUBES; CELLS;
D O I
10.1016/j.jpowsour.2013.06.147
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Development of lithium/sulfur (Li/S) batteries is limited by their low Coulombic efficiency and low cycle life, which are mainly due to active mass loss and polysulfide dissolution into the electrolyte solution. Here we report a new approach to overcome these drawbacks by employing a novel composite polymer electrolyte that not only facilitates rapid transport of lithium ions for electrochemical reactions with sulfur, resulting in improved capacity of the battery, but also prevents the generated polysulfides from shuttling between the electrodes during cycling of the battery. Improved performance of the battery was achieved: An initial discharge capacity of 1648 mA h g(sulfur)(-1) and reversible capacity of 1143 mA h g(sulfur)(-1) were obtained after 100 cycles at 0.2 C (1 C = 1672 mA h g(-1)), which could be among the highest reversible capacities reported for Li/S batteries so far. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:656 / 662
页数:7
相关论文
共 25 条
[11]   Facile dry synthesis of sulfur-LiFePO4 core-shell composite for the scalable fabrication of lithium/sulfur batteries [J].
Kim, C. -S. ;
Guerfi, A. ;
Hovington, P. ;
Trottier, J. ;
Gagnon, C. ;
Barray, F. ;
Vijh, A. ;
Armand, M. ;
Zaghib, K. .
ELECTROCHEMISTRY COMMUNICATIONS, 2013, 32 :35-38
[12]   Fabrication and characterization of hexagonal mesoporous silica monolith via post-synthesized hydrothermal process [J].
Lei, Jia-Heng ;
Liu, Dan ;
Guo, Li-Ping ;
Yan, Xue-Min ;
Tong, Hui .
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2006, 39 (02) :169-174
[13]   Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte [J].
Liang, Xiao ;
Wen, Zhaoyin ;
Liu, Yu ;
Wu, Meifen ;
Jin, Jun ;
Zhang, Hao ;
Wu, Xiangwei .
JOURNAL OF POWER SOURCES, 2011, 196 (22) :9839-9843
[14]   Polysulfide shuttle study in the Li/S battery system [J].
Mikhaylik, YV ;
Akridge, JR .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2004, 151 (11) :A1969-A1976
[15]   High capacity cathode materials for Li-S batteries [J].
Ryu, Ho Suk ;
Park, Jin Woo ;
Park, Jinsoo ;
Ahn, Jae-Pyeung ;
Kim, Ki-Won ;
Ahn, Jou-Hyeon ;
Nam, Tae-Hyeon ;
Wang, Guoxiu ;
Ahn, Hyo-Jun .
JOURNAL OF MATERIALS CHEMISTRY A, 2013, 1 (05) :1573-1578
[16]   Review on composite polymer electrolytes for lithium batteries [J].
Stephan, A. Manuel ;
Nahm, K. S. .
POLYMER, 2006, 47 (16) :5952-5964
[17]   Binding mechanism of sulfur and dehydrogenated polyacrylonitrile in sulfur/polymer composite cathode [J].
The Nam Long Doan ;
Ghaznavi, Mahmoudreza ;
Zhao, Yan ;
Zhang, Yongguang ;
Konarov, Aishuak ;
Sadhu, Mikhail ;
Tangirala, Ravichandra ;
Chen, P. .
JOURNAL OF POWER SOURCES, 2013, 241 :61-69
[18]   Sulfur composite cathode materials for rechargeable lithium batteries [J].
Wang, JL ;
Yang, J ;
Wan, CR ;
Du, K ;
Xie, JY ;
Xu, NX .
ADVANCED FUNCTIONAL MATERIALS, 2003, 13 (06) :487-492
[19]   Polymer lithium cells with sulfur composites as cathode materials [J].
Wang, JL ;
Liu, L ;
Ling, ZJ ;
Yang, J ;
Wan, CR ;
Jiang, CY .
ELECTROCHIMICA ACTA, 2003, 48 (13) :1861-1867
[20]   Analysis of the synthesis process of sulphur-poly(acrylonitrile)-based cathode materials for lithium batteries [J].
Wang, Li ;
He, Xiangming ;
Li, Jianjun ;
Gao, Jian ;
Guo, Jianwei ;
Jiang, Changyin ;
Wan, Chunrong .
JOURNAL OF MATERIALS CHEMISTRY, 2012, 22 (41) :22077-22081