Hot deformation behavior and microstructural evolution of as-cast 304L antibacterial austenitic stainless steel

被引：8
作者：
Li, Juan [1 ,2 ]
Zhao, Guanghui [1 ,2 ,3 ]
Chen, Huiqin [1 ,2 ]
Huang, Qingxue [2 ,3 ]
Ma, Lifeng [1 ,2 ,3 ]
Zhang, Wei [2 ,4 ]
机构：
[1] Taiyuan Univ Sci & Technol, Taiyuan 030024, Shanxi, Peoples R China
[2] Coordinat Innovat Ctr Taiyuan Heavy Machinery Equ, Taiyuan, Shanxi, Peoples R China
[3] Shanxi Prov Key Lab Met Device Design Theory & Te, Taiyuan, Shanxi, Peoples R China
[4] Taiyuan Iron & Steel Grp Co Ltd, Taiyuan, Shanxi, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2018年 / 5卷 / 02期
关键词：
hot deformation behavior; antimicrobial austenitic stainless steel; constitutive model; dynamic recrystallization; DYNAMIC RECRYSTALLIZATION; STRAIN RATES; COMPRESSION; MECHANISMS; WORKING; CU;
D O I：
10.1088/2053-1591/aaa445
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Hot deformation behavior of as-cast antibacterial austenitic stainless steel with 2.42% copper was investigated in the temperature range of 900 degrees C-1150 degrees C, and the strain rates ranged from 0.01 to 20 s(-1). At strain rates higher than 1 s(-1), the flow stress curves were corrected by considering adiabatic heating. Kinetic analysis indicated that the hot deformation activation energy of the steel was 375.65 kJ mol(-1). The dynamic recrystallization (DRX), misorientation, and twins were analyzed using optical microscope or electron backscatter diffraction. The results showed that DRX mechanism in hot deformation mainly corresponded to discontinuous recrystallization at high temperature and with a high rate. By increasing the temperature and strain rate, the recrystallization degree and the twin ratio increased simultaneously. Both of these factors promoted one another.
引用
收藏
页数：9
相关论文
共 24 条
[21]  
Wu X., 2010, Research on high-temperature physical properties and mechanical properties of stainless steel
[22]  
[杨柯 Yang Ke], 2006, [材料研究学报, Chinese Journal of Materials Research], V20, P523
[23]   Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773-1273 K [J].
Yanushkevich, Zhanna ;
Belyakov, Andrey ;
Kaibyshev, Rustam .
ACTA MATERIALIA, 2015, 82 :244-254
[24]   Flow softening of 253 MA austenitic stainless steel during hot compression at higher strain rates [J].
Zhang, Jingqi ;
Di, Hongshuang ;
Wang, Xiaoyu .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 650 :483-491
123