Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

被引：77

作者：

Arbeiter, Florian ^{[1
]}

Spoerk, Martin ^{[2
]}

Wiener, Johannes ^{[1
]}

Gosch, Anja ^{[1
]}

Pinter, Gerald ^{[1
]}

机构：

[1] Univ Leoben, Mat Sci & Testing Polymers, Otto Gloeckel Str 2, A-8700 Leoben, Austria

[2] Univ Leoben, Polymer Proc, Otto Gloeckel Str 2, A-8700 Leoben, Austria

来源：

POLYMER TESTING | 2018年 / 66卷

关键词：

Fused filament fabrication; Additive manufacturing; Polylactic acid; Homogeneous properties; Fracture mechanics; Lifetime-model; FATIGUE-CRACK GROWTH; BEHAVIOR; TOUGHNESS; POLYMERS; TENSILE; DESIGN; PLA;

D O I：

10.1016/j.polymertesting.2018.01.002

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

It has been widely believed that components produced by fused filament fabrication (FFF) experience weak mechanical properties due to weld lines. However, recent studies disproved this finding by reaching strength values almost identical to those of compression-molded plates by optimizing the printing parameters. Hence, the present work investigates different fracture mechanical properties on specimens produced by FFF under optimized conditions dependent on the strand orientation. For monotonic loading conditions, tests on compact tension (CT) and single edge notched bending (SENB) specimens resulted in rather similar results for specimens produced in 0 degrees, 0 degrees/90 degrees and 90 degrees strand orientation. Surprisingly, the 90 degrees orientation, in which the strand interface is directly loaded, even outperformed the 0 degrees orientation in certain cases. Fatigue tests on CT-specimens proved a similar independency of the strand orientation for both crack initiation and crack propagation laws, which can be used for lifetime estimation of components produced by FFF.

引用

页码：105 / 113

页数：9

共 39 条

[1]

Afrose M.F., 2016, PROG ADDIT MANUF, V1, P21, DOI DOI 10.1007/S40964-015-0002-3

[2] Anisotropic material properties of fused deposition modeling ABS [J].

Ahn, SH ;

Montero, M ;

Odell, D ;

Roundy, S ;

Wright, PK .

RAPID PROTOTYPING JOURNAL, 2002, 8 (04) :248-257

[3] Fracture resistance measurement of fused deposition modeling 3D printed polymers [J].

Aliheidari, Nahal ;

Tripuraneni, Rajasekhar ;

Ameli, Amir ;

Nadimpalli, Siva .

POLYMER TESTING, 2017, 60 :94-101

[4] Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer [J].

Arbeiter, F. ;

Pinter, G. ;

Frank, A. .

POLYMER TESTING, 2014, 37 :186-192

[5] Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers [J].

Arbeiter, Florian ;

Schrittesser, Bernd ;

Frank, Andreas ;

Berer, Michael ;

Pinter, Gerald .

POLYMER TESTING, 2015, 45 :83-92

[6]

Arbeiter FJ, 2016, J APPL POLYM SCI, V133, DOI [10.1002/app.43948, 10.1002/APP.43948]

[7] The mechanical behavior of poly(lactic acid) unreinforced and nanocomposite films subjected to monotonic and fatigue loading conditions [J].

Averett, Rodney D. ;

Realff, Mary L. ;

Jacob, Karl ;

Cakmak, Mukerrem ;

Yalcin, Baris .

JOURNAL OF COMPOSITE MATERIALS, 2011, 45 (26) :2717-2726

[8] Experimental study on the 3D-printed plastic parts and predicting the mechanical properties using artificial neural networks [J].

Bayraktar, Omer ;

Uzun, Gultekin ;

Cakiroglu, Ramazan ;

Guldas, Abdulmecit .

POLYMERS FOR ADVANCED TECHNOLOGIES, 2017, 28 (08) :1044-1051

[9] Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins [J].

Berer, Michael ;

Pinter, Gerald ;

Feuchter, Michael .

JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (19)

[10] Interfacial mechanical behavior of 3D printed ABS [J].

Cole, Daniel P. ;

Riddick, Jaret C. ;

Jaim, H. M. Iftekhar ;

Strawhecker, Kenneth E. ;

Zander, Nicole E. .

JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (30)

← 1 2 3 4 →