An experimental study of high-speed rotor supported by air bearings: test RIG and first experimental results

被引：38

作者：

Belforte, Guido ^{[1
]}

Raparelli, Terenziano ^{[1
]}

Viktorov, Vladimir ^{[1
]}

Trivella, Andrea ^{[1
]}

Colombo, Federico ^{[1
]}

机构：

[1] Politecn Torino, Dept Mech, I-10128 Turin, Italy

来源：

TRIBOLOGY INTERNATIONAL | 2006年 / 39卷 / 08期

关键词：

D O I：

10.1016/j.triboint.2005.07.013

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The paper contains the description of the test rig and first experimental data regarding the mechanical and the thermal behaviour of a 7 kg rotor, 460 mm long and with a diameter of 50 mm, supported by externally-pressurized air-lubricated bearings. The fig allows to load the rotor radially and axially both in static and dynamic conditions and to measure the orbits on the supports. The rotating imbalance response at different speeds has been measured up to 60,000 rpm. The orbits are always synchronous with the rotational speed and their shape changes also with temperature (though this effect is almost negligible). The rotor is stable and does not present whirl instability. (c) 2005 Elsevier Ltd. All rights reserved.

引用

页码：839 / 845

页数：7

共 15 条

[1] AN EXPERIMENTAL INVESTIGATION INTO BEARING-INDUCED SPINDLE VIBRATION [J].