Effect of W content on the compression properties and abrasive wear behavior of the (TiB2-TiCxNy)/(Ni plus W) composites

被引：16
作者：
Wang, Yawei
Shu, Shili
Qiu, Feng
Zhou, Dongshuai
Wang, Jinguo [1 ]
Jiang, Qichuan
机构：
[1] Jilin Univ, Minist Educ, Key Lab Automobile Mat, Changchun 130025, Peoples R China
来源：
MATERIALS & DESIGN | 2013年 / 45卷
基金：
中国国家自然科学基金;
关键词：
A. Metal matrix composites; C. Powder metallurgy; E; Wear; NI-BASED CERMETS; MECHANICAL-PROPERTIES; COMBUSTION SYNTHESIS; HIGH-TEMPERATURE; MICROSTRUCTURE; PARTICLES; PRESSURE; TIB2; MO;
D O I：
10.1016/j.matdes.2012.09.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The (TiB2-TiCxNy)/(Ni + W) composites were fabricated successfully by the method of combustion synthesis and hot press consolidation in the Ni-W-Ti-B4C-BN system. The effect of the content of W on the hardness, compression properties and abrasive wear behavior of the composites was investigated. The results indicate that with increasing W content from 0 to 8 wt.%, the average sizes of the TiB2 and TiCxNy particles decrease firstly and then keep almost constant, while the hardness and the compression strength increase firstly and then change a little. The abrasive wear resistance of the composites increases firstly and then decreases with the increase in the W content. (c) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：286 / 291
页数：6
相关论文
共 50 条
  • [31] Effect of W Content on Microstructure and Thermophysical Properties of W-Cu Composites Fabricated via Selective Laser Melting
    Yan Anru
    Liu Xuesheng
    Wang Zhiyong
    He Dingyong
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2019, 46 (07):
  • [32] Effect of B4C size on the fabrication and compression properties of in situ TiB2-Ti2AlC/TiAl composites
    Shu, Shili
    Qiu, Feng
    Lin, Yanyan
    Wang, Yawei
    Wang, Jinguo
    Jiang, Qichuan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 551 : 88 - 91
  • [33] The Effect of TiB2 Content on Wear and Mechanical Behavior of AZ91 Magnesium Matrix Composites Produced by Powder Metallurgy
    Fatih Aydin
    Yavuz Sun
    M. Emre Turan
    Powder Metallurgy and Metal Ceramics, 2019, 57 : 564 - 572
  • [34] Effect of Ni content on the wear behavior of Al-Si-Cu-Mg-Ni/SiC particles composites
    Yanyu Liu
    Lina Jia
    Wenbo Wang
    Zuheng Jin
    Hu Zhang
    International Journal of Minerals, Metallurgy and Materials, 2024, 31 : 374 - 383
  • [35] Effect of W Addition on Microstructure, Mechanical Properties, and Oxidation Behavior of ZrB2-SiC Composites
    Gao Zhongtang
    Lu Jiawei
    Yu Yuan
    Wang Yifei
    Yu Defeng
    Li Tongyang
    Wang Lujie
    Tang Huaguo
    Qiao Zhuhui
    RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (09) : 3003 - 3011
  • [36] Effect of TaC Content on Microstructure and Properties of W-TaC Composites
    Xu, Kai
    Zhang, Yaning
    Wang, Dong
    Jin, Xing
    Ding, Xiang
    MATERIALS, 2023, 16 (01)
  • [37] Modeling the abrasive wear behavior of in-situ synthesized magnesium RZ5/TiB2 metal matrix composites
    Meher, Arabinda
    Mahapatra, Manas Mohan
    Samal, Priyaranjan
    Vundavilli, Pandu R.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (04) : 1500 - 1510
  • [38] Fabrication and properties of mechanically alloyed and Ni activated sintered W matrix composites reinforced with Y2O3 and TiB2 particles
    Genc, A.
    Coskun, S.
    Ovecoglu, M. L.
    MATERIALS CHARACTERIZATION, 2010, 61 (07) : 740 - 748
  • [39] Investigation of Production and Abrasive Wear Behavior of Functionally Graded TiB2/Al and TiB2/Al-4Cu Composites
    Savas, Omer
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (03) : 543 - 553
  • [40] Effect of Ti Additives on the Sintering Behavior and Mechanical Properties of ZrC-W Composites
    Chen Lei
    Wang Yujin
    Zhou Yu
    Zhang Taiquan
    He Hui
    RARE METAL MATERIALS AND ENGINEERING, 2008, 37 : 556 - 559
12345