Effect of W content on the compression properties and abrasive wear behavior of the (TiB2-TiCxNy)/(Ni plus W) composites

被引：16
作者：
Wang, Yawei
Shu, Shili
Qiu, Feng
Zhou, Dongshuai
Wang, Jinguo [1 ]
Jiang, Qichuan
机构：
[1] Jilin Univ, Minist Educ, Key Lab Automobile Mat, Changchun 130025, Peoples R China
来源：
MATERIALS & DESIGN | 2013年 / 45卷
基金：
中国国家自然科学基金;
关键词：
A. Metal matrix composites; C. Powder metallurgy; E; Wear; NI-BASED CERMETS; MECHANICAL-PROPERTIES; COMBUSTION SYNTHESIS; HIGH-TEMPERATURE; MICROSTRUCTURE; PARTICLES; PRESSURE; TIB2; MO;
D O I：
10.1016/j.matdes.2012.09.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The (TiB2-TiCxNy)/(Ni + W) composites were fabricated successfully by the method of combustion synthesis and hot press consolidation in the Ni-W-Ti-B4C-BN system. The effect of the content of W on the hardness, compression properties and abrasive wear behavior of the composites was investigated. The results indicate that with increasing W content from 0 to 8 wt.%, the average sizes of the TiB2 and TiCxNy particles decrease firstly and then keep almost constant, while the hardness and the compression strength increase firstly and then change a little. The abrasive wear resistance of the composites increases firstly and then decreases with the increase in the W content. (c) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：286 / 291
页数：6
相关论文
共 50 条
  • [1] Effect of Ni content on the compression properties and abrasive wear behavior of the (TiB2-TiCxNy)/Ni composites
    Wang, Yawei
    Qiu, Feng
    Shu, Shili
    Lu, Jianbang
    Jiang, Qichuan
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2012, 34 : 8 - 12
  • [2] Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction (TiC-TiB2)/Cu Composites
    Qiu, Feng
    Han, Yue
    Cheng, Ai
    Lu, Jianbang
    Jiang, Qichuan
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2014, 27 (05) : 951 - 956
  • [3] Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction(TiC–TiB2)/Cu Composites
    Feng Qiu
    Yue Han
    Ai Cheng
    Jianbang Lu
    Qichuan Jiang
    Acta Metallurgica Sinica(English Letters), 2014, 27 (05) : 951 - 956
  • [4] Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction (TiC–TiB2)/Cu Composites
    Feng Qiu
    Yue Han
    Ai Cheng
    Jianbang Lu
    Qichuan Jiang
    Acta Metallurgica Sinica (English Letters), 2014, 27 : 951 - 956
  • [5] Effect of Ta addition on the microstructures and mechanical properties of in situ bi-phase (TiB2-TiCxNy)/(Ni-Ta) cermets
    Yang, Hong-Yu
    Wang, Zheng
    Shu, Shi-Li
    Lu, Jian-Bang
    CERAMICS INTERNATIONAL, 2019, 45 (04) : 4408 - 4417
  • [6] Effect of Al addition on the microstructures and compression properties of (TiCxNy-TiB2)/Ni composites fabricated by combustion synthesis and hot press
    Qiu, Feng
    Zuo, Rui
    Shu, Shi-Li
    Wang, Ya-Wei
    Jiang, Qi-Chuan
    POWDER TECHNOLOGY, 2015, 286 : 716 - 721
  • [7] Compression properties and abrasive wear behavior of high volume fraction TiCx-TiB2/Cu composites fabricated by combustion synthesis and hot press consolidation
    Lu, Jianbang
    Shu, Shili
    Qiu, Feng
    Wang, Yawei
    Jiang, Qichuan
    MATERIALS & DESIGN, 2012, 40 : 157 - 162
  • [8] Abrasive wear behavior of NiAl and NiAl-TiB2 composites
    Hawk, JA
    Alman, DE
    WEAR, 1999, 225 : 544 - 556
  • [9] The effect of HfC content on mechanical properties HfC-W composites
    Lee, Dongju
    Umer, Malik Adeel
    Ryu, Ho J.
    Hong, Soon H.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 44 : 49 - 53
  • [10] Abrasive wear behavior of TiB2 particle-reinforced copper matrix composites
    Tjong, SC
    Lau, KC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 282 (1-2): : 183 - 186
12345