Identification of damage tolerance of Ti3SiC2 by hardness indentations and single edge notched beam test

The damage tolerance of Ti3SiC2 has been identified by Vickers indentations and single edge notched beam (SENB) testing. The Vickers indentations were made at loads of 0.5-30 kg to measure the hardness: The results showed that the hardness decreased with increasing loads. No indentation cracks were observed around the damage zones, even when the load applied was 30 kg. The material around nnicrohardness indentations was pushed out, lots of grains were crushed into fragments under loads, and some grains exhibited lamination fracture. In addition, around the damage zones, a number of individual grains were delaminated and deformed heavily into a twisted. shape. This suggests that Ti3SiC2 exhibits plasticity at room temperature. Moreover, the SENB test also suggested that this layered material is damage tolerant. The mufti-absorbing energy mechanisms: grain pushout, pullout, and delamination, the buckling of individual grains, crack deflection, crack branching, and pinning, explained why the Ti3SiC2 is a damage tolerant material able to contain the extent of microdamage.