Effects of Ar ion irradiation on the diffusion bonding joints of Zr55Cu30Ni5Al10 bulk metallic glass to aluminum alloy

被引：9

作者：

Cao, J. ^{[1
]}

Chen, H. Y. ^{[1
]}

Song, X. G. ^{[2
]}

Liu, J. K. ^{[1
]}

Feng, J. C. ^{[1
,2
]}

机构：

[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China

[2] Harbin Inst Technol Weihai, Sch Mat Sci & Engn, Weihai 264209, Peoples R China

来源：

JOURNAL OF NON-CRYSTALLINE SOLIDS | 2013年 / 364卷

基金：

中国国家自然科学基金;

关键词：

Bulk metallic glass; Diffusion bonding; Irradiation; Crystallization; STRUCTURAL RELAXATION; ZR; BEHAVIOR; HARDNESS;

D O I：

10.1016/j.jnoncrysol.2013.01.012

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

1 keV low energy argon ion beam was used to irradiate the surface of Zr55Cu30Ni5Al10 bulk metallic glass. Bulk metallic glass specimens irradiated for different times were used to join with Aluminum alloy by argon ion activated diffusion bonding. Compared with the joints using the as-cast bulk metallic glass, the tensile strength of the joints using irradiated specimens had a drastic improvement. Moreover, a crystalline layer was obtained in the BMG side of the joint interface using irradiated specimens. The improved joint quality was attributed to the local heating resulting from a crystallization behavior of irradiated surface layer which increases the probability of jumping the barrier to form the atom bonds, as well as the significant enhancement of the atomic diffusivity after crystallization. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：53 / 56

页数：4

共 50 条

[31] Deformation behavior of a Zr55Al10Ni5Cu30 bulk metallic glass at high temperatures
Shin, HS
Jung, YJ
Kim, KH
Ahn, JH
Kato, H
Inoue, A
[J]. Metastable, Mechanically Alloyed and Nanocrystalline Materials, 2005, 24-25 : 359 - 362
[32] Viscosity of Zr55Cu30Al10Ni5 bulk metallic glass measured by laser viscometer
Liu, B. B.
Liu, B. Y.
Fang, X. S.
Zhang, L. Q.
Ye, F.
Chen, G. L.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 : S208 - S210
[33] Processing time in superplastic forming for Zr55Cu30Al10Ni5 bulk metallic glass
State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan
430074, China
[J]. Huazhong Ligong Daxue Xuebao, 3 (54-57): : 54 - 57
[34] Effect on mechanical properties of Zr55Cu30Al 10Ni5 bulk metallic glass by thermoplastic deformation
Mie Univ., Kurima-machiya-cho, Tsu, 514-8507
不详
[J]. Zairyo/Journal of the Society of Materials Science, Japan, 2007, 56 (02) : 171 - 177
[35] Influence of as-cast spherulites on the fracture toughness of a Zr55Cu30Al10Ni5 bulk metallic glass
Hin, S.
Bernard, C.
Doquet, V.
Yokoyama, Y.
Magueresse, A.
Keryvin, V.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 740 : 137 - 147
[36] Extra rejuvenation of Zr55Cu30Al10Ni5 bulk metallic glass using elastostatic loading and cryothermal treatment interaction
Samavatian, Majid
Gholamipour, Reza
Amadeh, Ahmad Ali
Mirdamadi, Shamsoddin
[J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2019, 506 : 39 - 45
[37] Bending plasticity of Zr55Al10Ni5Cu30 bulk metallic glass with monolithic amorphous structure
Hu, Y.
Yan, H. H.
Li, J. F.
Zhou, Y. H.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 688 : 620 - 625
[38] Friction welding of Zr55Al10Ni5Cu30 bulk metallic glasses
Shin, HS
Jeong, YJ
Choi, HY
Kato, H
Inoue, A
[J]. MATERIALS TRANSACTIONS, 2005, 46 (12) : 2768 - 2772
[39] Effect of cooling rate on the bending plasticity of Zr55Al10Ni5Cu30 bulk metallic glass
Hu, Y.
Yan, H. H.
Lin, T.
Li, J. F.
Zhou, Y. H.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 527 : 36 - 39
[40] Thermal Relaxation and High Temperature Creep of Zr55Cu30Al10Ni5 Bulk Metallic Glass
B.S.S. Daniel
A. Reger-Leonhard
M. Heilmaier
J. Eckert
L. Schultz
[J]. Mechanics of Time-Dependent Materials, 2002, 6 : 193 - 206

← 1 2 3 4 5 →