Microstructures and mechanical properties of thin 304 stainless steel sheets by friction stir welding

被引：23

作者：

Guo, Rui ^{[1
]}

Shen, Yifu ^{[1
]}

Huang, Guoqiang ^{[1
]}

Zhang, Wei ^{[1
]}

Guan, Wei ^{[1
]}

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing, Jiangsu, Peoples R China

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2018年 / 32卷 / 12期

基金：

中国国家自然科学基金;

关键词：

FSW; 304 stainless steel sheets; microstructure; mechanical properties; PURE COPPER JOINTS; ALUMINUM-ALLOYS; PLASTIC-FLOW; STEEL; PARAMETERS; RECRYSTALLIZATION; EVOLUTION; STRENGTH; BEHAVIOR; PHASE;

D O I：

10.1080/01694243.2017.1409064

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Friction stir welding (FSW) was performed on 304 stainless steel sheets. The welding speed was varied from 30 to 70mm/min. Because the FSW of thin plates is sensitive to heat input. The surface of the welds is smooth and without any macroscopic cracks and cavities only when the rotation speed is 50mm/min. The stir zone had equiaxed grains with austentic structure due to dynamic recrystallization. There was not any evidence for the presence of sigma phases being found in this study. Meanwhile, there was a weak region in the advancing side because of the flow of plastic metals. However, compared with the base material, mechanical properties of the joint are maintained in a comparatively high level.

引用

页码：1313 / 1323

页数：11

共 34 条

[1] Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints [J].

Abdollah-Zadeh, A. ;

Saeid, T. ;

Sazgari, B. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 460 (1-2) :535-538

[2] Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys [J].

Chang, CI ;

Lee, CJ ;

Huang, JC .

SCRIPTA MATERIALIA, 2004, 51 (06) :509-514

[3]

Davis J R, 1990, METALS HDB, V1, P1063

[4] Effect of δ-ferrite co-existence on hot deformation and recrystallization of austenite [J].

Dehghan-Manshadi, A. ;

Hodgson, P. D. .

JOURNAL OF MATERIALS SCIENCE, 2008, 43 (18) :6272-6277

[5] Frictions stir welding of copper under different welding parameters and media [J].

Farrokhi, H. ;

Heidarzadeh, A. ;

Saeid, T. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (08) :697-702

[6] Heterogeneity of crystallographic texture in friction stir welds of aluminum [J].

Field, DP ;

Nelson, TW ;

Hovanski, Y ;

Jata, KV .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (11) :2869-2877

[7] A process model for friction stir welding of age hardening aluminum alloys [J].

Frigaard, O ;

Grong, O ;

Midling, OT .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (05) :1189-1200

[8] Flow patterns during friction stir welding [J].

Guerra, A ;

Schmidt, C ;

McClure, JC ;

Murr, LE ;

Nunes, AC .

MATERIALS CHARACTERIZATION, 2002, 49 (02) :95-101

[9] Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate [J].

Han, Jian ;

Li, Huijun ;

Zhu, Zhixiong ;

Barbaro, Frank ;

Jiang, Laizhu ;

Xu, Haigang ;

Ma, Li .

MATERIALS & DESIGN, 2014, 63 :238-246

[10] Prediction of grain size and mechanical properties in friction stir welded pure copper joints using a thermal model [J].

Heidarzadeh, A. ;

Jabbari, M. ;

Esmaily, M. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (9-12) :1819-1829

← 1 2 3 4 →