EFFECT OF SWIRL INTENSITY ON HEAT TRANSFER CHARACTERISTICS OF SWIRLING FLAME IMPINGING ON A FLAT SURFACE

被引：0
|
作者：
Singh, Gurpreet [1 ]
Chander, Subhash [2 ]
机构：
[1] Lala Lajpat Rai Inst Engn & Technol, Dept Mech Engn, Moga 142001, Punjab, India
[2] Dr BR Ambedkar Natl Inst Technol, Dept Mech Engn, Jalandhar 144011, Punjab, India
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 8A | 2014年
关键词：
VISUALIZATION;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
An experimental investigation has been carried out to determine the effect of swirl intensity on heat transfer characteristics of swirling flame impinging on a flat surface. The swirl intensity was varied by using helical vane swirlers having angles of 15 degrees, 30 degrees and 60 degrees (low, medium and high swirl). Qualitative flame structures were studied by taking direct photographs of impinging flames. Experiments were conducted for different helical vane swirlers at different dimensionless separation distances (H/d = 1-6) for fixed value of Reynolds number (Re = 5000) and equivalence ratio (phi = 1.0). A dip in heat flux was observed at stagnation point for all levels of swirl. Peak heat flux was observed slightly away from the stagnation point due to centrifugal effect. A comparison of stagnation point heat flux has been done for different swirl intensities and for fixed operating conditions. Most uniform heat flux distribution was obtained corresponds to 30 degrees helical vane swirler (medium swirl) at all separation distances.
引用
收藏
页数：11
相关论文
共 50 条
  • [21] Heat transfer distribution of swirling flame jet impinging on a flat plate using twisted tapes
    Hindasageri, Vijaykumar
    Vedula, Rajendra P.
    Prabhu, Siddini V.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 91 : 1128 - 1139
  • [22] HEAT TRANSFER CHARACTERISTICS OF SWIRLING IMPINGING JETS
    Brown, Karl J.
    Persoons, Tim
    Murray, Darina B.
    PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 5: FUEL CELLS, GAS TURBINES, HEAT PIPES, JET IMPINGEMENT, RADIATION, 2010, : 657 - 665
  • [23] HEAT TRANSFER CHARACTERISTICS OF SWIRLING IMPINGING JETS
    Brown, Karl J.
    Murray, Darina B.
    Persoons, Tim
    O'Donovan, Tadhg S.
    IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 9, PTS A-C, 2010, : 1879 - 1889
  • [24] Heat transfer characteristics of an impinging swirling inverse diffusion butane/air flame jet
    Dong, L. L.
    Cheung, C. S.
    Leung, C. W.
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2021, 128
  • [25] Heat transfer from a turbulent swirling inverse diffusion flame to a flat surface
    Zhen, H. S.
    Leung, C. W.
    Cheung, C. S.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (11-12) : 2740 - 2748
  • [26] Experimental heat transfer study of confined flame jet impinging on a flat surface
    Hoser, D.
    von Rohr, Ph. Rudolf
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2018, 91 : 166 - 174
  • [27] Numerical study of heat transfer for a laminar Bunsen flame impinging on a flat surface
    Slastnaya, D. A.
    Hrebtov, M. Yu.
    Mullyadzhanov, R. I.
    Dulin, V. M.
    THERMOPHYSICS AND AEROMECHANICS, 2024, 31 (03) : 465 - 468
  • [28] Heat Transfer Characteristics of a Swirling Laminar Impinging Jet
    Ichimiya, Koichi
    Tsukamoto, Koji
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2010, 132 (01): : 1 - 5
  • [29] Flow structures and heat transfer of swirling jet impinging on a flat surface with micro-vibrations
    Wen, MY
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (3-4) : 545 - 560
  • [30] Heat transfer and flow visualization of swirling impinging jet on flat surface using helicoid inserts
    Illyas, S. Mohamed
    Bapu, B. R. Ramesh
    Rao, V. Venkata Subba
    JOURNAL OF VISUALIZATION, 2018, 21 (05) : 729 - 749
12345