Processing, rheology, and storage stability of recycled EVA/LDPE modified bitumen

被引：51

作者：

Garcia-Morales, M. ^{[1
]}

Partal, P. ^{[1
]}

Navarro, F. J. ^{[1
]}

Martinez-Boza, F. J. ^{[1
]}

Gallegos, C. ^{[1
]}

机构：

[1] Univ Huelva, Dept Ingn Quim, Fac Ciencias Expt, Huelva 21071, Spain

来源：

POLYMER ENGINEERING AND SCIENCE | 2007年 / 47卷 / 02期

关键词：

D O I：

10.1002/pen.20697

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The optimum processing conditions for the manufacture of polymer-modified bitumens (PMBs), as well as the rheological properties of the final polymer-bitumen blends, strongly depend on the characteristics of the mixing device used. The present work is focused on the comparison among the kinetics of the mixing process and the rheological properties and microstructural characteristics of PMBs manufactured in two different mixers. Thus, blends of 60/70 penetration grade bitumen and recycled EVA/LDPE were processed in both high and low-shear devices. Knowledge on the evolution of shear viscosity and microstructure with time, as well as on the mechanical properties of the final polymer-bitumen blends, was gained from rheological and modulated DSC tests, and optical microscopy. The results obtained demonstrate that processing in the high-shear device yields a significant decrease in the time needed for the polymer-bitumen blend to reach the final stage of the manufacturing process, as well as an important reduction in bitumen oxidation and enhanced properties in a wide range of in-service temperatures. However, polymer-bitumen blends manufactured in the high-shear device are not stable during its storage at high temperature.

引用

页码：181 / 191

页数：11

共 38 条

[11]

Blanco R, 1996, J APPL POLYM SCI, V61, P1493

[12]

Claudy P, 1991, FUEL SCI TECHN INT, V9, P71, DOI DOI 10.1080/08843759108942254

[13]

Cordobés F, 1998, AN QUIM-INT, V94, P274

[14]

CROCKFORD WW, 1995, 1333IF TEX DEP TRANS

[15] Rheological effects of waxes in bitumen [J].

Edwards, Y ;

Redelius, P .

ENERGY & FUELS, 2003, 17 (03) :511-520

[16] Blends of bitumen with various polyolefins [J].

Fawcett, AH ;

McNally, T .

POLYMER, 2000, 41 (14) :5315-5326

[17] Mixing rheometry for studying the manufacture of lubricating greases [J].

Franco, JM ;

Delgado, MA ;

Valencia, C ;

Sánchez, MC ;

Gallegos, C .

CHEMICAL ENGINEERING SCIENCE, 2005, 60 (8-9) :2409-2418

[18] Linear viscoelasticity of recycled EVA-modified bitumens [J].

García-Morales, M ;

Partal, P ;

Navarro, FJ ;

Martínez-Boza, F ;

Gallegos, C .

ENERGY & FUELS, 2004, 18 (02) :357-364

[19] Viscous properties and microstructure of recycled eva modified bitumen [J].

García-Morales, M ;

Partal, P ;

Navarro, FJ ;

Martínez-Boza, F ;

Gallegos, C ;

González, N ;

González, O ;

Muñoz, ME .

FUEL, 2004, 83 (01) :31-38

[20] Rheology and stability of bitumen/EVA blends [J].

González, O ;

Muñoz, ME ;

Santamaría, A ;

García-Morales, M ;

Navarro, FJ ;

Partal, P .

EUROPEAN POLYMER JOURNAL, 2004, 40 (10) :2365-2372

← 1 2 3 4 →