A novel approach to determine the velocity dependency of the friction behavior during machining by means of digital particle image velocimetry (DPIV)

被引：20

作者：

Denkena, Berend ^{[1
]}

Kroedel, Alexander ^{[1
]}

Beblein, Sascha ^{[1
]}

机构：

[1] Leibniz Univ Hannover, Inst Prod Engn & Machine Tools IFW, Univ 2, D-30823 Hannover, Germany

来源：

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY | 2021年 / 32卷

关键词：

Cutting; Friction; Particle; Image Velocimetry (DPIV); IDENTIFICATION; COATINGS; MODEL; HEAT;

D O I：

10.1016/j.cirpj.2020.11.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The current state of the art shows that the friction behavior during machining is not yet sufficiently understood and that there is still a need for further research. This represents a major obstacle to the successful further development of friction models for chip formation simulations. Therefore, a novel method for the analysis of friction mechanisms in machining via high-speed chip formation recordings is presented in this study. Within the frame of the investigations, a significant influence of the sliding velocity of the chip on the coefficient of friction could be determined over a wide range of different coating properties and cutting velocities. (C) 2020 CIRP.

引用

页码：81 / 90

页数：10

共 16 条

[1]

[Anonymous], 2014, J OPEN RES STW

[2] Identification of a friction model - Application to the context of dry cutting of an AISI 316L austenitic stainless steel with a TiN coated carbide tool [J].

Bonnet, C. ;

Valiorgue, F. ;

Rech, J. ;

Claudin, C. ;

Hamdi, H. ;

Bergheau, J. M. ;

Gilles, P. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (11) :1211-1223

[3] Identification of a friction model for modelling of orthogonal cutting [J].

Brocail, J. ;

Watremez, M. ;

Dubar, L. .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (09) :807-814

[4] Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications [J].

Grzesik, W ;

Zalisz, Z ;

Nieslony, P .

SURFACE & COATINGS TECHNOLOGY, 2002, 155 (01) :37-45

[5]

Grzesik W., 2019, MECHANIK, DOI [10.17814/mechanik.2019.4.33, DOI 10.17814/MECHANIK.2019.4.33]

[6] SLIDING WEAR TESTING OF COATED CUTTING-TOOL MATERIALS [J].

HEDENQVIST, P ;

OLSSON, M .

TRIBOLOGY INTERNATIONAL, 1991, 24 (03) :143-150

[7] On errors of digital particle image velocimetry [J].

Huang, H ;

Dabiri, D ;

Gharib, M .

MEASUREMENT SCIENCE AND TECHNOLOGY, 1997, 8 (12) :1427-1440

[8] Advances in material and friction data for modelling of metal machining [J].

Melkote, Shreyes N. ;

Grzesik, Wit ;

Outeiro, Jose ;

Rech, Joel ;

Schulze, Volker ;

Attia, Helmi ;

Arrazola, Pedro-J. ;

M'Saoubi, Rachid ;

Saldana, Christopher .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2017, 66 (02) :731-754

[9] SIMULATION OF CUTTING-TOOL WEAR BY A MODIFIED PIN-ON-DISC TEST [J].

OLSSON, M ;

SODERBERG, S ;

JACOBSON, S ;

HOGMARK, S .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1989, 29 (03) :377-390

[10]

Peng BX, 2020, INT J ADV MANUF TECH, V107, P4357, DOI 10.1007/s00170-019-04709-8

← 1 2 →