Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality

被引:25
作者
Champion, Wyatt M. [1 ]
Cooper, C. David [1 ]
Mackie, Kevin R. [1 ]
Cairney, Paul [2 ]
机构
[1] Univ Cent Florida, Dept Civil Environm & Construct Engn, Orlando, FL 32129 USA
[2] Maxwest Environm Syst Inc, Sanford, FL USA
关键词
BIOMASS GASIFICATION; MATHEMATICAL-MODEL; SEWAGE-SLUDGE; PYROLYSIS; MECHANISMS; TAR; AIR;
D O I
10.1080/10962247.2013.845619
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In an effort to decrease the land disposal of sewage sludge biosolids and to recover energy, gasification has become a viable option for the treatment of waste biosolids. The process of gasification involves the drying and devolatilization and partial oxidation of biosolids, followed closely by the reduction of the organic gases and char in a single vessel. The products of gasification include a gaseous fuel composed largely of N-2, H2O, CO2, CO, H-2, CH4, and tars, as well as ash and unburned solid carbon. A mathematical model was developed using published devolatilization, oxidation, and reduction reactions, and calibrated using data from three different experimental studies of laboratory-scale fluidized-bed sewage sludge gasifiers reported in the literature. The model predicts syngas production rate, composition, and temperature as functions of the biosolids composition and feed rate, the air input rate, and gasifier bottom temperature. Several data sets from the three independent literature sources were reserved for model validation, with a focus placed on five species of interest (CO, CO2, H-2, CH4, and C6H6). The syngas composition predictions from the model compared well with experimental results from the literature. A sensitivity analysis on the most important operating parameters of a gasifier (bed temperature and equivalence ratio) was performed as well, with the results of the analysis offering insight into the operations of a biosolids gasifier. Implications: As gasification becomes a more prominent waste disposal option, understanding the effects of feedstock composition and gasifier parameters on the production of syngas (rate and quality) becomes increasingly important. A model has been developed for the gasification of dried sewage sludge that will allow for prediction of changes in syngas quality (and energy recovery from the waste), and should be helpful in assessing the benefits of new gasification projects.
引用
收藏
页码:160 / 174
页数:15
相关论文
共 36 条
[1]  
[Anonymous], 2007, Statistics for Engineering and the Sciences
[2]   Modeling of Pyrolysis and Gasification of Biomass in Fluidized Beds: A Review [J].
Basu, Prabir ;
Kaushal, Priyanka .
CHEMICAL PRODUCT AND PROCESS MODELING, 2009, 4 (01)
[3]   Pyrolysis gasification of dried sewage sludge in a combined screw and rotary kiln gasifier [J].
Chun, Young Nam ;
Kim, Seong Cheon ;
Yoshikawa, Kunio .
APPLIED ENERGY, 2011, 88 (04) :1105-1112
[4]  
Dryer F.L., 1973, Sym (International) on Combustion, V14, P987, DOI [10.1016/S0082-0784(73)80090-6, DOI 10.1016/S0082-0784(73)80090-6]
[5]   A two-phase one-dimensional biomass gasification kinetics model [J].
Fiaschi, D ;
Michelini, M .
BIOMASS & BIOENERGY, 2001, 21 (02) :121-132
[6]  
Field M. A., 1967, REACTION RATE CARBON
[7]  
Greenbaum A., 2012, Numerical methods: design, analysis, and computer implementation of algorithms
[8]  
Greenhouse Gas Technology Center (GGTC) and U.S. Environmental Protection Agency, 2012, EPA600R12540 GGTC SO
[9]   Modeling the effects of the operational parameters on H2 composition in a biomass fluidized bed gasifier [J].
Gungor, Afsin .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (11) :6592-6600
[10]  
He L, 2010, P 20 INT C FLUID BED, P686, DOI DOI 10.1007/978-3-642-02682-9_106