Effect of austenisation temperature on phase transformation in low carbon microalloyed pipeline steel

被引：6
|
作者：
Zhang, D. T. [1 ]
Qiao, Z. X. [1 ,2 ]
Liu, Y. C. [1 ]
Huo, J. [1 ]
Chen, Y. [1 ]
Yan, Z. S. [1 ]
机构：
[1] Tianjin Univ, Sch Mat Sci & Engn, State Key Lab Hydaul Engn Simulat & Safety, Tianjin 300072, Peoples R China
[2] Tianjin Univ Commerce, Sch Mech Engn, Tianjin 300134, Peoples R China
来源：
MATERIALS RESEARCH INNOVATIONS | 2013年 / 17卷
基金：
中国国家自然科学基金;
关键词：
Austenisation; Pipeline steel; Phase transformation; Acicular ferrite; AUSTENITE GRAIN-SIZE; LOW-ALLOY STEEL; ACICULAR FERRITE; BEHAVIOR;
D O I：
10.1179/1432891713Z.000000000215
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A detailed investigation was carried out on the effect of austenisation temperature on the phase transformation in X65 microalloyed pipeline steel during continuous cooling at a rate of 200 degrees C min(-1) by means of high resolution dilatometric measurement and microstructure observation. The results showed that with austenisation temperature increasing in the range of 850-1000 degrees C, phase transformation temperature range shifts to lower temperatures and the formation of acicular ferrite phase is promoted. Furthermore, the increase in austenisation temperature results in refined grains after continuous cooling to room temperature, associating with the appearance of acicular ferrite structure in steel. The present investigation is helpful to optimise the parameters of rolling or heat treatment technology in industrial production of X65 steel.
引用
收藏
页码：S200 / S204
页数：5
相关论文
共 50 条
  • [31] Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb-V microalloyed steel
    Olasolo, M.
    Uranga, P.
    Rodriguez-Ibabe, J. M.
    Lopez, B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2559 - 2569
  • [32] Effect of austenitizing temperature on microstructure and mechanical properties evaluation of microalloyed low-carbon RAFM steel
    Cao, Haibo
    Chen, Wei
    FUSION ENGINEERING AND DESIGN, 2023, 190
  • [33] Effect of phase transformation on high temperature mechanical properties of medium carbon steel
    National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China
    Kang T'ieh, 2008, 8 (81-85):
  • [34] Bainite Transformation Under Continuous Cooling of Nb-Microalloyed Low Carbon Steel
    YI Hai-long
    JournalofIronandSteelResearch(International), 2006, (03) : 36 - 39
  • [35] Bainite transformation under continuous cooling of Nb-microalloyed low carbon steel
    Yi Hai-long
    Du Lin-xiu
    Wang Guo-dong
    Liu Xiang-hua
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2006, 13 (03) : 36 - +
  • [36] Effect of heating rate on reaustenitisation of low carbon niobium microalloyed steel
    San Martin, D.
    de Cock, T.
    Garcia-Junceda, A.
    Caballero, F. G.
    Capdevila, C.
    de Andres, C. Garcia
    MATERIALS SCIENCE AND TECHNOLOGY, 2008, 24 (03) : 266 - 272
  • [37] Continuous cooling transformation of ultra-low carbon microalloyed steel after deformation
    Kong, Jun-Hua
    Liu, Chang-Ming
    Zheng, Lin
    Guo, Bin
    Liu, Xiao-Guo
    Xie, Chang-Sheng
    Jinshu Rechuli/Heat Treatment of Metals, 2004, 29 (11):
  • [38] Bainite Transformation Under Continuous Cooling of Nb-Microalloyed Low Carbon Steel
    Hai-long Yi
    Lin-xiu Du
    Guo-dong Wang
    Xiang-hua Liu
    Journal of Iron and Steel Research International, 2006, 13 : 36 - 39
  • [39] Phase transformation temperatures of an ultra low carbon steel
    Hwu, YJ
    Lenard, JG
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1998, 120 (01): : 19 - 25
  • [40] Effect of Nb on inclusions and phase transformation in simulated high heat input coarse-grain HAZ of Nb/Ti low carbon microalloyed steel
    Yang, Yulong
    Jia, Xiao
    Ma, Yaxin
    Wang, Ping
    Zhu, Fuxian
    MATERIALS CHARACTERIZATION, 2022, 189
12345