Effect of austenisation temperature on phase transformation in low carbon microalloyed pipeline steel

被引：6

作者：

Zhang, D. T. ^{[1
]}

Qiao, Z. X. ^{[1
,2
]}

Liu, Y. C. ^{[1
]}

Huo, J. ^{[1
]}

Chen, Y. ^{[1
]}

Yan, Z. S. ^{[1
]}

机构：

[1] Tianjin Univ, Sch Mat Sci & Engn, State Key Lab Hydaul Engn Simulat & Safety, Tianjin 300072, Peoples R China

[2] Tianjin Univ Commerce, Sch Mech Engn, Tianjin 300134, Peoples R China

来源：

MATERIALS RESEARCH INNOVATIONS | 2013年 / 17卷

基金：

中国国家自然科学基金;

关键词：

Austenisation; Pipeline steel; Phase transformation; Acicular ferrite; AUSTENITE GRAIN-SIZE; LOW-ALLOY STEEL; ACICULAR FERRITE; BEHAVIOR;

D O I：

10.1179/1432891713Z.000000000215

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A detailed investigation was carried out on the effect of austenisation temperature on the phase transformation in X65 microalloyed pipeline steel during continuous cooling at a rate of 200 degrees C min(-1) by means of high resolution dilatometric measurement and microstructure observation. The results showed that with austenisation temperature increasing in the range of 850-1000 degrees C, phase transformation temperature range shifts to lower temperatures and the formation of acicular ferrite phase is promoted. Furthermore, the increase in austenisation temperature results in refined grains after continuous cooling to room temperature, associating with the appearance of acicular ferrite structure in steel. The present investigation is helpful to optimise the parameters of rolling or heat treatment technology in industrial production of X65 steel.

引用

页码：S200 / S204

页数：5

共 50 条

[11] Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb-Ti Microalloyed Low Carbon HSLA Steel
Bharadwaj, Rishabh
Sarkar, Aditya
Rakshe, Bhushan
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2022, 11 (04) : 661 - 672
[12] Phase reverted transformation-induced nanograined microalloyed steel: Low temperature superplasticity and fracture
Misra, R. D. K.
Hu, J.
Yashwanth, I. V. S.
Challa, V. S. A.
Du, L. -X.
Sun, G. -S.
Xie, Hui
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 668 : 105 - 111
[13] MANUFACTURING OF A DUAL PHASE STEEL FROM A LOW CARBON MICROALLOYED STEEL
Navarro Farfan, Jorge Antonio
Pacheco Cedeno, Jose Sergio
Gutierrez Barajas, Gisela
Lopez Soria, Jose Jaime
Garnica Gonzalez, Pedro
DYNA, 2020, 95 (03): : 282 - 287
[14] Bainite transformation during continuous cooling of low carbon microalloyed steel
Yakubtsov, IA
Boyd, JD
MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (03) : 296 - 301
[15] Effect of austenisation temperature on bainite transformation below martensite starting temperature
Tian, Junyu
Xu, Guang
Jiang, Zhengyi
Yuan, Qing
Chen, Guanghui
Hu, Haijiang
MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (13) : 1539 - 1550
[16] Effect of strain on the transformation characteristics of low carbon microalloyed steels
Cizek, P
Wynne, BP
Davies, CHJ
Muddle, BC
Hodgson, PD
THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II, 1997, : 875 - 881
[17] Effect of Quenching Temperature on the Strengthening Mechanism of Low-Carbon Microalloyed Quenching and Partitioning Steel
Chu, Xiaohong
Chen, Weijian
Liu, Jinhai
Pan, Yinkui
Sun, Hang
Zhao, Zhengzhi
STEEL RESEARCH INTERNATIONAL, 2023, 94 (01)
[18] TEMPERATURE BEHAVIOUR OF THE BORIDE LAYER OF A LOW-CARBON MICROALLOYED STEEL
Ucar, Nazim
Aytar, Omer Bads
Calik, Adnan
MATERIALI IN TEHNOLOGIJE, 2012, 46 (06): : 621 - 625
[19] Effects of deformation of austenite on bainite transformation in niobium microalloyed low carbon steel
Yi, Hai-Long
Du, Lin-Xiu
Wang, Guo-Dong
Liu, Xiang-Hua
Cailiao Kexue yu Gongyi/Material Science and Technology, 2008, 16 (03): : 442 - 444
[20] Effect of impurities on phase transformation and precipitation in a low-carbon steel
Duan, Jiaqi
Farrugia, Didier
Poplawsky, Jonathan D.
Davis, Claire
Li, Zushu
MATERIALIA, 2024, 36

← 1 2 3 4 5 →