A Novel Multirate Dual-Porosity Model for Improved Simulation of Fractured and Multiporosity Reservoirs

被引:83
作者
Geiger, S. [1 ]
Dentz, M.
Neuweiler, I. [2 ]
机构
[1] Heriot Watt Univ, Inst Petr Engn, Carbonate Res Grp, Edinburgh EH14 4AS, Midlothian, Scotland
[2] Leibniz Univ Hannover, Hannover, Germany
来源
SPE JOURNAL | 2013年 / 18卷 / 04期
关键词
WATER/OIL/GAS TRANSFER-FUNCTIONS; RATE MASS-TRANSFER; NUMERICAL-SIMULATION; SHAPE FACTORS; 2-PHASE FLOW; PROPER USE; MULTIPHASE FLOW; TRACER TESTS; FLUID-FLOW; MATRIX;
D O I
10.2118/148130-PA
中图分类号
TE [石油、天然气工业];
学科分类号
0820 ;
摘要
A major part of the world's remaining oil reserves is in fractured carbonate reservoirs, which are dual-porosity (fracture-matrix) or multiporosity (fracture/vug/matrix) in nature. Fractured reservoirs suffer from poor recovery, high water cut, and generally low performance. They are modeled commonly by use of a dual-porosity approach, which assumes that the high-permeability fractures are mobile and low-permeability matrix is immobile. A single transfer function models the rate at which hydrocarbons migrate from the matrix into the fractures. As shown in many numerical, laboratory, and field experiments, a wide range of transfer rates occurs between the immobile matrix and mobile fractures. These arise, for example, from the different sizes of matrix blocks (yielding a distribution of shape factors), different porosity types, or the inhomogeneous distribution of saturations in the matrix blocks. Thus, accurate models are needed that capture all the transfer rates between immobile matrix and mobile fracture domains, particularly to predict late-time recovery more reliably when the water cut is already high. In this work, we propose a novel multi-rate mass-transfer (MRMT) model for two-phase flow, which accounts for viscous-dominated flow in the fracture domain and capillary flow in the matrix domain. It extends the classical (i.e., single-rate) dual-porosity model to allow us to simulate the wide range of transfer rates occurring in naturally fractured multiporosity rocks. We demonstrate, by use of numerical simulations of water-flooding in naturally fractured rock masses at the gridblock scale, that our MRMT model matches the observed recovery curves more accurately compared with the classical dual-porosity model. We further discuss how our multi-rate dual-porosity model can be parameterized in a predictive manner and how the model could be used to complement traditional commercial reservoir-simulation workflows.
引用
收藏
页码:670 / 684
页数:15
相关论文
共 55 条
[1]  
Abramowitz M., 1972, HDB MATH FUNCTIONS
[2]  
Abushaikha A.S., 2008, EUR EAGE C EXH, DOI [10.2118/113890-MS, DOI 10.2118/113890-MS]
[3]  
Al-Kobaisi M, 2009, SPE RESERV EVAL ENG, V12, P211, DOI 10.2118/124213-PA
[4]  
[Anonymous], 1989, SPE RES ENG, DOI DOI 10.2118/16007-PA
[5]  
[Anonymous], 1993, FLOW CONTAMINANT TRA
[6]   Evaluation of Matrix-Fracture Transfer Functions for Counter-Current Capillary Imbibition [J].
Babadagli, Tayfun ;
Hatiboglu, Can Ulas ;
Hamida, Tarek .
TRANSPORT IN POROUS MEDIA, 2009, 80 (01) :17-56
[7]   Verification and Proper Use of Water-Oil Transfer Function for Dual-Porosity and Dual-Permeability Reservoirs [J].
Balogun, A. ;
Kazemi, H. ;
Ozkan, E. ;
Al-Kobaisi, M. ;
Ramirez, B. .
SPE RESERVOIR EVALUATION & ENGINEERING, 2009, 12 (02) :189-199
[8]  
Bear J., 1972, Dynamics of Fluids in Porous Media
[9]   Analysis of imbibition in mixed-wet rocks using pore-scale modeling [J].
Behbahani, H ;
Blunt, MJ .
SPE JOURNAL, 2005, 10 (04) :466-473
[10]  
Belayneh M., 2004, SPECIAL PUBLICATION, P243