Effect of the annealing temperature on the microstructural evolution and mechanical properties of TiZrAlV alloy

被引：41

作者：

Jing, R. ^{[1
]}

Liang, S. X. ^{[1
,2
]}

Liu, C. Y. ^{[1
]}

Ma, M. Z. ^{[1
]}

Liu, R. P. ^{[1
]}

机构：

[1] Yanshan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China

[2] Hebei Univ Engn, Coll Equipment Mfg, Handan 056038, Peoples R China

来源：

MATERIALS & DESIGN | 2013年 / 52卷

关键词：

BETA-TITANIUM ALLOYS; PHASE-TRANSFORMATION; VARIANT SELECTION; AL;

D O I：

10.1016/j.matdes.2013.06.039

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study aimed to evaluate the effects of the annealing temperature on the structural evolution and mechanical properties of TiZrAlV alloy. The microstructural evolution and mechanical properties of the alloy were investigated by X-ray diffraction, metallographic analysis, tensile testing, and microhardness testing. The results showed that the thickness of the a phase that precipitated from the parent phase was sensitive to the annealing temperature. With increased annealing temperature, the a-phase tended to exhibit equiaxed grains, except for the specimen annealed at 1050 degrees C. The tensile strength of the equiaxed a grains were also demonstrated to have higher tensile strength than those of the lamellar a phase. The optimal mechanical properties of the alloy was obtained after annealing at 850 degrees C, i.e., sigma(b) = 1245 MPa, sigma(0.2) = 1006 MPa, and epsilon = 16.89%. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：981 / 986

页数：6

共 20 条

[1]

BANIA PJ, 1994, JOM-J MIN MET MAT S, V46, P16, DOI 10.1007/BF03220742

[2] Bismuth effect on castability and mechanical properties of Ti-6Al-4V alloy cast in copper mold [J].

Cheng, WW ;

Lin, JH ;

Ju, CP .

MATERIALS LETTERS, 2003, 57 (16-17) :2591-2596

[3] Martensitic transformation and metastable β-phase in binary titanium alloys with d-metals of 4-6 periods [J].

Dobromyslov, AV ;

Elkin, VA .

SCRIPTA MATERIALIA, 2001, 44 (06) :905-910

[4]

EYLON D, 1994, JOM-J MIN MET MAT S, V46, P14

[5] Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation [J].

Furuhara, T ;

Maki, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 312 (1-2) :145-154

[6] Titanium alloys for marine application [J].

Gorynin, IV .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 263 (02) :112-116

[7] Precipitation and recrystallization behavior of beta titanium alloys during continuous heat treatment [J].

Ivasishin, OM ;

Markovsky, PE ;

Matviychuk, YV ;

Semiatin, SL .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34 (01) :147-158

[8] Aging effects on the microstructures and mechanical properties of the Ti-20Zr-6.5Al-4V alloy [J].

Jing, R. ;

Liang, S. X. ;

Liu, C. Y. ;

Ma, M. Z. ;

Liu, R. P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 :474-479

[9] Effect of heat treatment on microstructures and tensile properties of as-forged Ti-45Al-5Nb-0.3Y alloy [J].

Kong, Fantao ;

Chen, Yuyong ;

Yang, Fei .

INTERMETALLICS, 2011, 19 (02) :212-216

[10]

Lutjering G., 2003, ENG MAT PRO, P289

← 1 2 →