Development of a roundness profile measurement system for parallel rollers based on a V-block method

被引：5

作者：

Goho, K

Mitui, K

Hayashi, A

机构：

[1] Matsushita Res Inst Tokyo, Tama Ku, Kanagawa 2148501, Japan

[2] Keio Univ, Fac Sci & Technol, Dept Mech Engn, Kohoku Ku, Kanagawa 2230061, Japan

[3] Nano Corp, Ota Ku, Tokyo 1460085, Japan

来源：

JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING | 1999年 / 42卷 / 02期

关键词：

shape measurement; computer aided analysis; rolling bearing; V-block method; parallel roller; out of roundness;

D O I：

10.1299/jsmec.42.410

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Cross-section roundness profile measurement is generally considered a significant procedure in the processing of parallel rollers requiring the highest quality in dimensional accuracy. This becomes a difficult procedure due to the fact that such rollers show extremely small dimensional error, resulting in expensive and time consuming measuring methods or, in most cases, the ignorance of the procedure itself. This report deals with the development of a roundness measurement system for high-precision parallel rollers based on a V-block double enlargement device. The measuring principle of the V-block method is described, followed by details of our proposed double enlargement device. Cross-section profile measurements are conducted on JISP1 grade parallel rollers, and these results are further compared to results obtained from a contemporary radius measurement method to demonstrate the validity of the device for such application.

引用

页码：410 / 415

页数：6