The influence of metal ions on the conductivity of Nafion 112 in polymer electrolyte membrane fuel cell

被引:39
作者
Wang, Heli [1 ]
Turner, John A. [1 ]
机构
[1] Natl Renewable Energy Lab, Golden, CO 80401 USA
关键词
membrane conductivity; metallic ions; PEMFC; Nafion;
D O I
10.1016/j.jpowsour.2008.05.077
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Nafion 112 membranes were soaked in I M H2SO4 solutions containing variable amounts of Fe and Cr ions, either individually or mixed. An even distribution of the metal ions on the surface of the membranes was observed with electron probe microanalysis (EPMA) mapping. The proton conductivity of the soaked membranes was investigated using a conductivity cell. For Fe ions, the conductivity was almost constant until the Fe-ion solution concentration reached 300 ppm. Over the 300-ppm threshold, the conductivity decreased significantly. Similar results were obtained with Cr ions in the membrane, but here the threshold was approximately 200 ppm in the solution. Mixed metal ions were found to decrease these threshold values due to the additive effect of the two metals. (C) 2008 Published by Elsevier B.V.
引用
收藏
页码:576 / 580
页数:5
相关论文
共 31 条
[1]   Ionic conductivity of proton exchange membranes [J].
Beattie, PD ;
Orfino, FP ;
Basura, VI ;
Zychowska, K ;
Ding, JF ;
Chuy, C ;
Schmeisser, J ;
Holdcroft, S .
JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2001, 503 (1-2) :45-56
[2]   Assessment of thermal nitridation to protect metal bipolar plates in polymer electrolyte membrane fuel cells [J].
Brady, MP ;
Weisbrod, K ;
Zawodzinski, C ;
Paulauskas, I ;
Buchanan, RA ;
Walker, LR .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2002, 5 (11) :A245-A247
[3]   In-situ resistance measurements of Nafion(R) 117 membranes in polymer electrolyte fuel cells [J].
Buchi, FN ;
Scherer, GG .
JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1996, 404 (01) :37-43
[4]   PASSIVITY OF HIGH-NITROGEN STAINLESS ALLOYS - THE ROLE OF METAL OXYANIONS AND SALT FILMS [J].
CLAYTON, CR ;
HALADA, GP ;
KEARNS, JR .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 198 (1-2) :135-144
[5]   Stainless steel as a bipolar plate material for solid polymer fuel cells [J].
Davies, DP ;
Adcock, PL ;
Turpin, M ;
Rowen, SJ .
JOURNAL OF POWER SOURCES, 2000, 86 (1-2) :237-242
[6]   Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells [J].
Hornung, R ;
Kappelt, G .
JOURNAL OF POWER SOURCES, 1998, 72 (01) :20-21
[7]   A novel polymer electrolyte fuel cell for laboratory investigations and in-situ contact resistance measurements [J].
Ihonen, J ;
Jaouen, F ;
Lindbergh, G ;
Sundholm, G .
ELECTROCHIMICA ACTA, 2001, 46 (19) :2899-2911
[8]   Materials and design development for bipolar/end plates in fuel cells [J].
Kumar, A ;
Reddy, RG .
JOURNAL OF POWER SOURCES, 2004, 129 (01) :62-67
[9]   Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments [J].
Li, MC ;
Luo, SZ ;
Zeng, CL ;
Shen, JN ;
Lin, HC ;
Cao, CN .
CORROSION SCIENCE, 2004, 46 (06) :1369-1380
[10]  
LIDE DR, 1997, CRC HDB CHEM PHYSICS, P12