Corrosion inhibition using 2-mercaptobenzimidazole on T6 treated 6061 Al-SiCp composite in acetic acid

被引：5

作者：

Chacko, Melby ^{[1
]}

Nayak, Jagannath ^{[1
]}

机构：

[1] NITK, Dept Met & Mat Engn, Mangaluru 575025, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期

关键词：

Al-SiCp composite; T6; treatment; corrosion; inhibition; chemisorption; MILD-STEEL; ALLOY; BEHAVIOR; DERIVATIVES; ADSORPTION; COPPER;

D O I：

10.1016/j.matpr.2015.07.257

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

6061 Al-SiCp composite was T6 treated by solutionizing the sample at 350 degrees C and water quenching. It was then underaged at 140 degrees C and aging profile was obtained using Rockwell B hardness. Corrosion characteristics of the underaged composite was studied at varying temperatures. Acetic acid in altered concentrations was used as medium for corrosion studies. 2-mercaptobenzimidazole was added in different concentrations for inhibiting the corrosion reaction. Inhibition efficiency and thermodynamic parameters supported that 2-mercaptobenzimidazole is an effective inhibitor which adsorbed on to the surface by mixed adsorption where chemisorption was predominant. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：2728 / 2736

页数：9

共 48 条

[11] Corrosion inhibition of copper and aluminium by 2-mercaptobenzimidazole and octylphosphonic acid-Surface pre-treatment and method of film preparation
Kozlica, Dzevad K.
Milosev, Ingrid
ELECTROCHIMICA ACTA, 2022, 431
[12] 3-Ethyl-4-amino-5-mercapto-1,2,4-triazole as a Corrosion Inhibitor for 6061/Al-15 vol% SiCp Composite in a Sodium Hydroxide Solution
Kumari, P. D. Reena
Nayak, Jagannath
Shetty, A. Nityananda
SYNTHESIS AND REACTIVITY IN INORGANIC METAL-ORGANIC AND NANO-METAL CHEMISTRY, 2011, 41 (07) : 774 - 784
[13] Effect of a T6 aging treatment on the corrosion behaviour of in-situ AlxNiy reinforced AA6061 composite
Vishwanatha, A. D.
Panda, Bijayani
Shivanna, D. M.
MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 4112 - 4117
[14] Corrosion inhibition of 6061 Al-15 vol. pct. SiC(p) composite and its base alloy in a mixture of sulphuric acid and hydrochloric acid by 4-(N,N-dimethyl amino) benzaldehyde thiosemicarbazone
Pinto, Geetha Mable
Nayak, Jagannath
Shetty, A. Nityananda
MATERIALS CHEMISTRY AND PHYSICS, 2011, 125 (03) : 628 - 640
[15] Microstructure and Wear Properties of T6 Heat Treated Semisolid A356-TiB2 composite
Zulkamal, N. A. M.
Nasir, L. M. M.
Anasyida, A. S.
REGIONAL CONFERENCE ON MATERIALS AND ASEAN MICROSCOPY CONFERENCE 2017 (RCM & AMC 2017), 2018, 1082
[16] Application of QFA coupled with CFD analysis to predict the hardness of T6 heat treated Al6061 cylinder
Ko, Dae-Hoon
Ko, Dae-Cheol
Lim, Hak-Jin
Kim, Byung-Min
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2013, 27 (09) : 2839 - 2844
[17] Effect of magnesium ions on the protective power of corrosion products formed on the surface of Al 6061 T6 alloy 10% Al2O3 (v/v) composite in solutions containing chlorides
Traverso, P
Beccaria, AM
SURFACE AND INTERFACE ANALYSIS, 1998, 26 (07) : 524 - 530
[18] Corrosion behavior of an artificially aged (T6) Al-Si-Mg-based metal matrix composite
Dikici, B.
Gavgali, M.
Tekmen, C.
JOURNAL OF COMPOSITE MATERIALS, 2006, 40 (14) : 1259 - 1269
[19] Estimation of fracture toughness (KIC) using Charpy impact test for Al6061T6 and Al7075T6 alloys subjected to corrosion
Kumar, S. Sunil
Londe, Neelakantha, V
Kumar, K. Dilip
Kittur, Mohammed Ibrahim
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 2414 - 2420
[20] Mechanistic study of thin film sulfuric acid anodizing rate difference between Al2024 T3 and Al6061 T6
Ding, Zhongfen
SURFACE & COATINGS TECHNOLOGY, 2019, 357 : 280 - 288

← 1 2 3 4 5 →