Fabrication of dual-parameter fiber-optic sensor by cascading FBG with FPI for simultaneous measurement of temperature and gas pressure

被引:62
作者
Liu, Yinggang [1 ]
Yang, Danqing [1 ]
Wang, Yuxi [1 ]
Zhang, Ting [1 ]
Shao, Min [1 ]
Yu, Dakuan [1 ]
Fu, Haiwei [1 ]
Jia, Zhenan [1 ]
机构
[1] Xian Shiyou Univ, Minist Educ, Key Lab Photo Elect Gas & Oil Logging & Detecting, Xian 710065, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Fiber-optic sensor; Fabry-Perot interferometer; Fiber bragg grating; Dual-parameter measurement; CROSS-SENSITIVITY;
D O I
10.1016/j.optcom.2019.03.034
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
A dual-parameter fiber-optic sensor based on fiber Bragg grating (FBG) cascaded with Fabry-Perot interferometer (FPI) structure is described and demonstrated to measure temperature and gas pressure simultaneously. The proposed sensing structure consists of an extrinsic FPI in the form of hemispherical ultraviolet (UV) curing glue capped on a FBG end face. The spectral interference peak produced by the UV glue FPI is sensitive to ambient temperature and gas pressure variations, whereas the reflection spectrum of FBG only depends on temperature and insensitive to pressure change, therefore, the temperature and gas pressure can be simultaneously measured by this cascaded sensor. Experimental results show that the sensor has higher temperature and gas pressure sensitivities of 223.4 pm/degrees C and 24.99 nm/MPa in a range from 30 degrees C to 110 degrees C and from 0.1 MPa to 0.7 MPa. Utilizing the temperature-dependent sensitivity of FBG, a constructed sensitivity matrix is used to distinguish measurement of temperature and gas pressure, and the measurement resolutions are determined to be 0.086 degrees C and 0.730 KPa. This sensing architecture is not only an effective method for single-point multi-parameter measurement, but also has merits of high sensitivity, compactness, ease of fabrication and low cost, which make it valuable for biosensors and medical applications.
引用
收藏
页码:166 / 171
页数:6
相关论文
共 20 条
[1]   Optical fiber magnetic field sensors with peanut-shape structure cascaded with LPFG [J].
Cao Y. ;
Zhao Y. ;
Tong Z.-R. ;
Wang Y. .
Optoelectronics Letters, 2016, 12 (05) :0358-0360
[2]   Pressure and Temperature Sensor Based on Graphene Diaphragm and Fiber Bragg Gratings [J].
Dong, Nannan ;
Wang, Sumei ;
Jiang, Lan ;
Jiang, Yi ;
Wang, Peng ;
Zhang, Liuchao .
IEEE PHOTONICS TECHNOLOGY LETTERS, 2018, 30 (05) :431-434
[3]   Method of correlation function for analyzing cross-sensitivity of strain and temperature in fiber grating sensors [J].
Han G.-H. ;
Zhang W.-G. .
Optoelectronics Letters, 2007, 3 (3) :195-198
[4]   Design of a highly-birefringent microstructured photonic crystal fiber for pressure monitoring [J].
Jewart, Charles M. ;
Quintero, Sully Mejia ;
Braga, Arthur M. B. ;
Chen, Kevin P. .
OPTICS EXPRESS, 2010, 18 (25) :25657-25664
[5]   Simultaneous measurement of pressure and temperature with a single FBG embedded in a polymer diaphragm [J].
Leal-Junior, Arnaldo G. ;
Diaz, Camilo A. R. ;
Frizera, Anselmo ;
Marques, Carlos ;
Ribeiro, Moises R. N. ;
Pontes, Maria Jose .
OPTICS AND LASER TECHNOLOGY, 2019, 112 :77-84
[6]  
Li Wei, 2007, Frontiers of Electrical and Electronic Engineering in China, V2, P234, DOI 10.1007/s11460-007-0043-6
[7]   Highly-sensitive gas pressure sensor using twin-core fiber based in-line Mach-Zehnder interferometer [J].
Li, Zhengyong ;
Liao, Changrui ;
Wang, Yiping ;
Xu, Lei ;
Wang, Dongning ;
Dong, Xiaopeng ;
Liu, Shen ;
Wang, Qiao ;
Yang, Kaiming ;
Zhou, Jiangtao .
OPTICS EXPRESS, 2015, 23 (05) :6673-6678
[8]  
Liang Hao, 2018, SENSORS, V18
[9]   Temperature Compensation Fiber Bragg Grating Pressure Sensor Based on Plane Diaphragm [J].
Liang, Minfu ;
Fang, Xinqiu ;
Ning, Yaosheng .
PHOTONIC SENSORS, 2018, 8 (02) :157-167
[10]   Simultaneous measurement of gas pressure and temperature with integrated optical fiber FPI sensor based on in-fiber micro-cavity and fiber-tip [J].
Liu, Yinggang ;
Zhang, Ting ;
Wang, Yuxi ;
Yang, Danqing ;
Liu, Xin ;
Fu, Haiwei ;
Jia, Zhenan .
OPTICAL FIBER TECHNOLOGY, 2018, 46 :77-82