Microstructure characteristic and its effect on mechanical and shape memory properties in a Fe-17Mn-8Si-0.3C alloy

被引：7

作者：

Koyama, Motomichi ^{[1
]}

Sawaguchi, Takahiro ^{[1
]}

Tsuzaki, Kaneaki ^{[1
,2
]}

机构：

[1] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan

[2] Univ Tsukuba, Tsukuba, Ibaraki 3050047, Japan

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2013年 / 573卷

基金：

日本学术振兴会;

关键词：

Shape memory; Microstructure; Phase transition; Metallography; Scanning electron microscopy (SEM); MN-SI ALLOYS; EPSILON-MARTENSITIC-TRANSFORMATION; STACKING-FAULT ENERGY; C ALLOYS; GAMMA; IRON;

D O I：

10.1016/j.jallcom.2013.03.289

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The influences of the Si content on the mechanical and shape memory properties of Fe-17Mn-xSi-0.3C alloys (wt.%) were examined, and a specific focus was placed on the properties of the Fe-17Mn-8Si-0.3C alloy. The 8%Si addition changed the initial microstructure from an austenite to an austenite/ferrite dual phase. A sufficient amount of deformation-induced e-martensite was observed despite the pre-existing ferrite. Mn and C were preferentially distributed to the austenite, while Si was localized in the ferrite. The formation of ferrite increased the yield strength and the shape recovery stress, and decreased the starting temperature for the shape recovery. (C) 2013 Elsevier B. V. All rights reserved.

引用

页码：15 / 19

页数：5

共 50 条

[1] Microstructure, shape memory behavior and mechanical properties of hot rolled Fe-17Mn-5Si-5Cr-4Ni-0.3C-1Ti shape memory alloy
Kim, Dohyung
Park, Chanhee
Lee, Junghoon
Hong, Kinam
Park, Yongho
Lee, Wookjin
ENGINEERING STRUCTURES, 2021, 239
[2] An attempt to lower Mn content of Fe-17Mn-6Si-0.3C shape memory alloy
Min, X. H.
Sawaguchi, T.
Ogawa, K.
Maruyama, T.
Yin, F. X.
Tsuzaki, K.
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 : S478 - S482
[3] Shape Memory and Mechanical Properties of Cold Rolled and Annealed Fe-17Mn-5Si-5Cr-4Ni-1Ti-0.3C Alloy
Kim, Dohyung
Hong, Kinam
Sim, Jeesoo
Lee, Junghoon
Lee, Wookjin
MATERIALS, 2021, 14 (02) : 1 - 12
[4] Effect of Ni, C and Ti Addition on Shape Recovery Behavior and the Mechanical Properties of Fe-17Mn-5Si-5Cr Shape Memory Alloys
Kim, Dohyoung
Kim, Yonghwan
Oak, Jeong-Jung
Lee, Junghoon
Park, Chan Hee
Lee, Wookjin
Park, Yongho
KOREAN JOURNAL OF METALS AND MATERIALS, 2020, 58 (10): : 660 - 671
[5] Thermo-mechanical processing and the shape memory effect in an Fe-Mn-Si-based shape memory alloy
Stanford, N
Dunne, DP
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 422 (1-2): : 352 - 359
[6] The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Cu-Al-Mn Shape Memory Alloy
Kozuh, S.
Gojic, M.
Ivanic, I.
Grguric, T. Holjevac
Kosec, B.
Anzel, I.
KEMIJA U INDUSTRIJI-JOURNAL OF CHEMISTS AND CHEMICAL ENGINEERS, 2018, 67 (1-2): : 11 - 17
[7] The effect of microstructure on the shape recovery of a Fe-Mn-Si-Cr-Ni stainless steel shape memory alloy
Maji, BC
Krishnan, M
SCRIPTA MATERIALIA, 2003, 48 (01) : 71 - 77
[8] Shape memory and mechanical properties of a Fe-Mn-Si-based shape memory alloy: Effect of crystallographic texture generated during additive manufacturing
Ferretto, I.
Kim, D.
Lee, W. J.
Hosseini, E.
della Ventura, N. M.
Sharma, A.
Sofras, C.
Capek, J.
Polatidis, E.
Leinenbach, C.
MATERIALS & DESIGN, 2023, 229
[9] Si content dependence on shape memory and tensile properties in Fe-Mn-Si-C alloys
Koyama, M.
Sawaguchi, T.
Tsuzaki, K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2882 - 2888
[10] Microstructure, mechanical properties and shape memory effect of Ni-Mn-Ga-B high-temperature shape memory alloy
Zhang, Xin
Liu, Qingsuo
Zeng, Xianshun
Sui, Jiehe
Cai, Wei
Wang, Haibo
Feng, Yan
INTERMETALLICS, 2016, 68 : 113 - 117

← 1 2 3 4 5 →