Effects of strain and strain rate on the abrasive wear behavior of high manganese austenitic steel

被引：4

作者：

Lindroos, Matti ^{[1
]}

Kuokkala, Veli-Tapani ^{[1
]}

Lehtovaara, Arto ^{[2
]}

Kivikyto-Reponen, Paivi ^{[3
]}

机构：

[1] Tampere Univ Technol, Dept Mat Sci, Tampere Wear Ctr, POB 589, FI-33101 Tampere, Finland

[2] Tampere Univ Technol, Dept Mech & Design, Tampere, Finland

[3] Metso Minerals Oy, Engn Mat & Components, Tampere, Finland

来源：

ENGINEERING MATERIALS AND TRIBOLOGY | 2013年 / 527卷

关键词：

High manganese austenitic steel; dynamic strain rates; abrasion; POLYCRYSTALS; ALUMINUM;

D O I：

10.4028/www.scientific.net/KEM.527.211

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An abrasive wear analysis of the hardened surface layer in high austenitic manganese steel is presented to determine the effects of plastic strain and strain rate. The pre-deformation levels used in this study represent the typical surface layers resulting from the abrasive contact of Hadfield type steels. The effect of dynamic loading used in the pre-straining is accounted for alongside with various plastic strain levels. A friction study of the surface was included to determine the localization of work hardening and the ability of the microstructure to resist abrasion.

引用

页码：211 / +

页数：2

共 11 条

[1] On the comparison of the abrasive wear behavior of aluminum alloyed and standard Hadfield steels [J].

Abbasi, Majid ;

Kheirandish, Shahram ;

Kharrazi, Yousef ;

Hejazi, Jalal .

WEAR, 2010, 268 (1-2) :202-207

[2] STRAIN-HARDENING OF HADFIELD MANGANESE STEEL [J].

ADLER, PH ;

OLSON, GB ;

OWEN, WS .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (10) :1725-1737

[3] A physical model of the twinning-induced plasticity effect in a high manganese austenitic steel [J].

Allain, S ;

Chateau, JP ;

Bouaziz, O .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 387 :143-147

[4] The role of dense dislocation walls on the deformation response of aluminum alloyed hadfield steel polycrystals [J].

Canadinc, D. ;

Sehitoglu, H. ;

Maier, H. J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 :662-666

[5] MECHANISM OF WORK-HARDENING IN HADFIELD MANGANESE STEEL [J].

DASTUR, YN ;

LESLIE, WC .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (05) :749-759

[6] Evaluation of effect of chromium on wear performance of high manganese steel [J].

El-Mahallawi, I ;

Abdel-karim, R ;

Naguib, A .

MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (11) :1385-1390

[7] Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip [J].

Karaman, I ;

Sehitoglu, H ;

Beaudoin, AJ ;

Chumlyakov, YI ;

Maier, HJ ;

Tomé, CN .

ACTA MATERIALIA, 2000, 48 (09) :2031-2047

[8] High strain rate mechanical properties of austenitic manganese steel [J].

Lee, W. S. ;

Wang, B. K. .

MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23 (02) :151-157

[9] Effect of surface work hardening on wear behavior of Hadfield steel [J].

Yan, Weilin ;

Fang, Liang ;

Sun, Kun ;

Xu, Yunhua .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 :542-549

[10] THE EFFECT OF ALUMINUM ON THE WORK-HARDENING AND WEAR-RESISTANCE OF HADFIELD MANGANESE STEEL [J].

ZUIDEMA, BK ;

SUBRAMANYAM, DK ;

LESLIE, WC .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (09) :1629-1639

← 1 2 →