Analysis of elemental segregation in a microalloyed cast steel

被引:3
|
作者
Zhao, Jingwei [1 ]
Jiang, Zhengyi [1 ]
Wei, Dongbin [1 ]
机构
[1] Univ Wollongong, Sch Mech Mat & Mechatron Engn, Wollongong, NSW 2522, Australia
来源
ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 | 2013年 / 652-654卷
关键词
Microalloyed cast steel; Segregation; Energy dispersive X-ray spectroscopy;
D O I
10.4028/www.scientific.net/AMR.652-654.2465
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Quantitative investigation is made on the elemental segregation in different zones of a heavy microalloyed cast steel by energy dispersive X-ray spectroscopy. It is demonstrated that C shows serious segregation tendency than that of Mn and Si, and the degree of C segregation in the surface zone is higher than that in the central zone. C enrichment is generally observed at both dendrite arm and grain boundaries, and more C segregation at dendrite arm boundary in contrast to that at grain boundary is found in this steel. The distribution of C concentration shows a decreased trend from root to tip along the dendrite arm boundary. The C concentration at trigeminal boundary intersection shows higher level than that at other position of the grain boundaries.
引用
收藏
页码:2465 / 2468
页数:4
相关论文
共 50 条
  • [31] Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloys
    Nastac, L
    ACTA MATERIALIA, 1999, 47 (17) : 4253 - 4262
  • [32] IMPROVEMENT OF CENTERLINE SEGREGATION IN CONTINUOUSLY CAST STRAND BY CONTINUOUS FORGING PROCESS
    KOJIMA, S
    IMAI, T
    MIZOTA, H
    FUJIMURA, T
    MATSUKAWA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1992, 78 (12): : 1794 - 1801
  • [33] CONTROL OF CENTERLINE SEGREGATION IN CONTINUOUSLY CAST BLOOMS BY CONTINUOUS FORGING PROCESS
    NABESHIMA, S
    NAKATO, H
    FUJII, T
    FUJIMURA, T
    KUSHIDA, K
    MIZOTA, H
    ISIJ INTERNATIONAL, 1995, 35 (06) : 673 - 679
  • [34] Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels
    Wang, Jiangting
    Hodgson, Peter D.
    Bikmukhametov, Ilias
    Miller, Michael K.
    Timokhina, Ilana
    MATERIALS & DESIGN, 2018, 141 : 48 - 56
  • [35] Laser-induced breakdown spectroscopy applications in the steel industry: Rapid analysis of segregation and decarburization
    Boue-Bigne, Fabienne
    SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY, 2008, 63 (10) : 1122 - 1129
  • [36] Elemental Segregation and O-Phase Formation in a Gamma-Tial Alloy
    Gabrisch, Heike
    Krekeler, Tobias
    Lorenz, Uwe
    Rackel, Marcus Willi
    Ritter, Martin
    Pyczak, Florian
    Stark, Andreas
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 741 - 746
  • [37] Comparison Between Vanadium and Niobium Effects on the Mechanical Properties of Intercritically Heat Treated Microalloyed Cast Steels
    Morteza Kalantar
    Hamidreza Najafi
    M. Reza Afshar
    Metals and Materials International, 2019, 25 : 229 - 237
  • [38] Effect of acicular ferrite on banded structures in low-carbon microalloyed steel
    Shi, Lei
    Yan, Ze-sheng
    Liu, Yong-chang
    Yang, Xu
    Zhang, Cheng
    Li, Hui-jun
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2014, 21 (12) : 1167 - 1174
  • [39] Controlling centre segregation and shrinkage cavities without internal crack in as-cast bloom of steel GCr15 induced by soft reduction technologies
    Zong, Nanfu
    Huang, Jian
    Liu, Yang
    Jing, Tao
    Lu, Zhifang
    IRONMAKING & STEELMAKING, 2021, 48 (08) : 944 - 952
  • [40] Effect of acicular ferrite on banded structures in low-carbon microalloyed steel
    Lei Shi
    Ze-sheng Yan
    Yong-chang Liu
    Xu Yang
    Cheng Zhang
    Hui-jun Li
    International Journal of Minerals, Metallurgy, and Materials, 2014, 21 : 1167 - 1174