EVALUATION OF CERAMIC MATERIALS AND JOINTS USING UT AND X-RAY

被引：0

作者：

Nishimura, Yoshihiro ^{[1
]}

Suzuki, Takayuki ^{[1
]}

Kondo, Naoki ^{[1
]}

Kita, Hideki ^{[1
]}

机构：

[1] AIST, Adv Mfg Res Inst, Natl Inst Adv Ind Sci & Technol, Tsukuba, Ibaraki 3058564, Japan

来源：

MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES VII | 2013年

关键词：

D O I：

暂无

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Inspection methods to certify the reliability of large structural ceramic components composed of small blocks were studied. Ceramic blocks jointed with a silicon sheet or with glass were examined by UT and X-Ray. Silicon sheet or glass joints could be distinguished from other parts of component by UT more easily than by X-Ray. Fractures may originate in joints. More and larger defects were detected in non-joint parts and area than expected. It is important to develop technology to inspect joint layer deep within the sample. A new joint sample was developed, and its joint layer was inspected. It was found to have fewer defects in joints. Special probes were developed to inspect defects deep (95mm or deeper) within large components and were applied to large component samples. Defects of 0.5 mm were detected successfully.

引用

页码：47 / 55

页数：9

共 50 条

[41] X-ray techniques for for luxations of shoulder joints
Hermodsson, I
ACTA RADIOLOGICA, 1933, 14 (03) : 275 - 282
[42] X-RAY TECHNIQUE HIP JOINTS OF CHILDREN
IMHAUSER, G
RADIOLOGE, 1982, 22 (06): : 286 - 287
[43] X-ray spectral analysis of soldered joints
Parfenov, A.L.
Svarochnoe Proizvodstvo, 2002, (12): : 22 - 26
[44] Mineralogical characterization of ceramic raw materials by powder quantitative X-ray diffraction methods
Reventós, MM
Clausell, JV
Esteve, V
Delgado, JM
Ochando, LE
Rius, J
Martí, F
Amigó, JM
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2002, 41 (06): : 509 - 512
[45] INHOMOGENEITY OF INTERNAL-STRESSES AND X-RAY ELASTIC-CONSTANTS OF CERAMIC MATERIALS
TREFILOV, VI
GRIGORIEV, ON
KUSHNERENKO, SM
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 168 (01): : 99 - 102
[46] USE OF THE VARIABLE MICROFOCUS X-RAY TUBE IN QUALITY-CONTROL OF CERAMIC MATERIALS
RIDDER, HJ
AMERICAN CERAMIC SOCIETY BULLETIN, 1979, 58 (03): : 312 - 312
[47] X-RAY PHOTOELECTRON-SPECTROSCOPY OF ELECTRONIC CERAMIC MATERIALS - COMPLEX CHROMITES AND MANGANITES
PEDERSON, LR
DAKE, LS
ADVANCED CHARACTERIZATION TECHNIQUES CERAMICS, 1988, 5 : 43 - 54
[48] Computed tomography for light materials using a monochromatic X-ray beam produced by parametric X-ray radiation
Hayakawa, Y.
Hayakawa, K.
Inagaki, M.
Kaneda, T.
Nakao, K.
Nogami, K.
Sakae, T.
Sakai, T.
Sato, I.
Takahashi, Y.
Tanaka, T.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2013, 309 : 230 - 236
[49] Combined evaluation of aluminum alloys using X-ray diffraction and small angle X-ray scattering
Kono K.
Kitahara A.
Miyake A.
Sato K.
Mori A.
Keikinzoku/Journal of Japan Institute of Light Metals, 2023, 73 (01): : 41 - 45
[50] Evaluation of Gratings for X-ray and Neutron Phase Imaging Techniques by Using X-ray Projection Microscope
Minami, Katsunori
Yashiro, Wataru
Olbinado, Margie
Momose, Atsushi
INTERNATIONAL WORKSHOP ON X-RAY AND NEUTRON PHASE IMAGING WITH GRATINGS, 2012, 1466 : 193 - 198

← 1 2 3 4 5 →