Development of a new fracture test to identify the critical energy release rate: The Tensile Flexure test on Notched Specimen

被引：5
作者：
Vandellos, Thomas [1 ]
Hautier, Mathieu [1 ]
Carrere, Nicolas [1 ]
Huchette, Cedric [1 ]
机构：
[1] Off Natl Etud & Rech Aerosp, F-92322 Chatillon, France
来源：
ENGINEERING FRACTURE MECHANICS | 2012年 / 96卷
关键词：
Delamination; Fiber reinforced materials; Toughness testing; Fracture mechanics; I+II INTERLAMINAR FRACTURE; MODE-II; DELAMINATION FRACTURE; COMPOSITES; TOUGHNESS; BEAM;
D O I：
10.1016/j.engfracmech.2012.09.026
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Delamination is one of the most critical damage mechanisms in laminated composites. A fracture test, referenced in the following as Tensile Flexure test on Notched Specimen, is proposed in this work to characterize the propagation of delamination. After the description of the experimental procedure, experimental results on carbon/epoxy specimens are presented to describe the capabilities and advantages of the test to characterize delamination. Then, a new propagation law is proposed to describe the evolution of the fracture toughness. Finally, a non-deterministic analysis is performed to determine the influence of the measured parameters on the toughness identification. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：641 / 655
页数：15
相关论文
共 49 条
  • [1] Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test
    Boyano, A.
    De Gracia, J.
    Arrese, A.
    Mujika, F.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2017, 87 : 99 - 109
  • [2] Bone fracture characterization using the end notched flexure test
    Dourado, N.
    Pereira, F. A. M.
    de Moura, M. F. S. F.
    Morais, J. J. L.
    Dias, M. I. R.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (01): : 405 - 410
  • [3] Determination of Fracture Energy of Early Age Concrete through a Uniaxial Tensile Test on an Un-Notched Specimen
    Ren, Dongya
    Houben, Lambert
    MATERIALS, 2020, 13 (03)
  • [4] Experimental Investigation of Mode II Fracture Properties of Parallel Strand Bamboo Composite by End Notched Flexure Test
    Wang, Xiaorui
    Zhou, Aiping
    Chui, Ying Hei
    BIORESOURCES, 2019, 14 (01): : 1579 - 1590
  • [5] The over-notched flexure test method for determining the fracture toughness and bridging law of laminates
    Wang, Ziming
    Gong, Yu
    Chen, Junwei
    Yan, Lewei
    Ding, Zhaohu
    Zhang, Yongxiang
    Hu, Ning
    ENGINEERING FRACTURE MECHANICS, 2024, 301
  • [6] Evaluation of the frictional effect on the energy release rate in doubly end-notched tension test for mode II delamination
    Kumabe, Shu
    Yashiro, Shigeki
    Onodera, Sota
    ENGINEERING FRACTURE MECHANICS, 2023, 288
  • [7] Standardization of the End-Notched Flexure Test for Mode II Interlaminar Fracture Toughness Determination of Unidirectional Laminated Composites
    Davidson, Barry D.
    JOURNAL OF TESTING AND EVALUATION, 2015, 43 (06) : 1540 - 1553
  • [8] Measurement of mode II fracture toughness of wood by the end-notched flexure test
    Yoshihara, H
    Ohta, M
    JOURNAL OF WOOD SCIENCE, 2000, 46 (04) : 273 - 278
  • [9] AN ENERGY-BALANCE BASED APPROACH TO THE END-NOTCHED FLEXURE TEST
    LAMAN, SA
    VEDULA, M
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1994, 13 (06) : 541 - 554
  • [10] Mode II fracture characterization of wood using the Four-Point End-Notched Flexure (4ENF) test
    de Moura, M. F. S. F.
    Silva, M. A. L.
    Morais, J. J. L.
    Dourado, N.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, 98 : 23 - 29
12345