Experimental Investigations of the Power Absorbed at Mechanical Resonance

被引:2
作者
Horodinca, M. [1 ]
Seghedin, N. E. [1 ]
Carata, E. [1 ]
Filipoaia, C. [1 ]
Boca, M. [1 ]
Chitariu, D. [1 ]
机构
[1] Gheorghe Asachi Tech Univ Iasi, Dept Machine Tools, Iasi, Romania
关键词
Active Vibration Damping; Mechanical Power; Measurement; Negative Power; VIBRATION; GENERATOR; PLATES; FLOW;
D O I
10.1111/j.1747-1567.2011.00759.x
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This article describes the results of an investigation concerning the power absorbed at mechanical resonance for a single degree of freedom vibration system. Regarding the experimental purposes, the article proposes a cantilever beam set-up actuated by a voice-coil actuator and a computer-aided power monitoring technique. The absorbed power is evaluated in a steady-state regime for different values of excitation frequency around the resonance (the first mode of vibration). The experimental results are afterwards compared to the theoretical predictions. In addition, some transient regimes generated by beat vibrations are explored. The negative absorbed power has been observed. The article proposes an active vibration damping technique, based on actuation with a negative modal power supply.
引用
收藏
页码:21 / 31
页数:11
相关论文
共 19 条
[1]  
ABU-HANIEH A., 2003, THESIS U LIBRE BRUXE
[2]  
[Anonymous], 1928, Journal of Applied Mechanics
[3]   The equivalent impedance of power-minimising vibration controllers on plates [J].
Benassi, L ;
Elliott, SJ .
JOURNAL OF SOUND AND VIBRATION, 2005, 283 (1-2) :47-67
[4]  
De Marneffe B, 2007, THESIS U LIBRE BRUXE
[5]   Method for evaluating the electrical and mechanical characteristics of a voice coil actuator [J].
Fujii, Yusaku ;
Maru, Koichi ;
Jin, Tao .
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2010, 34 (04) :802-806
[6]   An electromagnetic, vibration-powered generator for intelligent sensor systems [J].
Glynne-Jones, P ;
Tudor, MJ ;
Beeby, SP ;
White, NM .
SENSORS AND ACTUATORS A-PHYSICAL, 2004, 110 (1-3) :344-349
[7]  
Howard C.Q, 2005, P ACOUSTICS 2005 9 1
[8]  
Lewin W., 2004, 8 03 PHYS3 VIBRATION
[9]   A study of power transmissibility for the vibration isolation of coherent vibratory machines on the floor of a building [J].
Mak, C. M. ;
Yun, Y. .
APPLIED ACOUSTICS, 2010, 71 (04) :368-372
[10]   Experimental investigation of vibration power flow in thin technical orthotropic plates by the method of vibration intensity [J].
Mandal, NK ;
Rahman, RA ;
Leong, MS .
JOURNAL OF SOUND AND VIBRATION, 2005, 285 (03) :669-695