Thermomechanical behavior of nanoclay filled TPU/PP blends

Both ester- and ether-based thermoplastic polyurethane (TPU) nanocomposites were prepared by melt blending, using 3 wt % Cloisite 10A (organically modified montmorillonite clay) as the nanoscale reinforcement. The nanocomposites were subsequently melt-blended with polypropylene (PP) using maleic anhydride grafted polypropylene (MA-g-PP) as a compatibilizer ( in the ratio of 70/30-TPU nano/PP, 70/25/5-TPU nano/PP/MA-g-PP). Besides giving substantial increase in modulus, tensile strength and other properties organoclay reinforcement functions as a surface modifier for TPU hard segment. X-ray diffraction studies revealed that compatibilization is further improved by introducing functionalized PP (MA-g-PP) in the organoclay containing blends. The blend system was evaluated by DSC, DMA, SEM, mechanical properties and Xray diffraction. The results indicate that the ester-TPU exhibited greater miscibility than ether-TPU. Abrasion resistance and water absorption were also better for compatibilised ester-TPU blends as compared to the ether-TPU materials.