Influence of spark plasma sintering and conventional sintering on microstructure and mechanical properties of hypereutectic Al-Si alloy and hypereutectic Al-Si/B4C composites

被引：5
作者：
Ozer, Melika [1 ]
Aydogan, Seher Irem [2 ]
Ozer, Alpay [3 ]
Cinici, Hanifi [1 ]
Ayas, Erhan [4 ]
机构：
[1] Gazi Univ, Fac Technol, Met & Mat Engn, TR-06560 Ankara, Turkey
[2] Gazi Univ, Inst Sci, Met & Mat Engn, TR-06560 Ankara, Turkey
[3] Gazi Univ, Vocat Sch Tech Sci, TR-06374 Ankara, Turkey
[4] Eskisehir Tech Univ, Engn Fac, Mat Sci & Engn, TR-26555 Eskisehir, Turkey
来源：
KOVOVE MATERIALY-METALLIC MATERIALS | 2022年 / 60卷 / 03期
关键词：
aluminum alloys; sintering; microstructure; mechanicalproperties; MATRIX COMPOSITES;
D O I：
10.31577/km.2022.3.171
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al-Si compacts and Al-Si/B4C composites were fabricated by conventional cold pressing + sintering and spark plasma sintering techniques. The effects of powder metallurgy techniques on density, microstructural properties, hardness, and transverse rupture strength were investigated. The advantages of spark plasma sintering, which is one of the fast sintering techniques, over conventional sintering were discussed. Green densities and sintered densities were found to decrease with increasing B4C addition. The relative density values of the samples produced with spark plasma sintering are over 96 %. B4C particles were clustered at the grain boundaries of the master alloy and/or in the intergranular pores. An increase of approximately 40 % was determined in the hardness values of the spark plasma sintering samples compared to the cold pressing+sintering samples. Transverse rupture strength was increased in spark plasma sintering samples containing 5 and 10 wt.% B4C.
引用
收藏
页码：171 / 179
页数：9
相关论文
共 31 条
[21]   The microstructures and mechanical properties of Al-15Si-2.5Cu-0.5Mg/(wt%)B4C composites produced through hot pressing technique and subjected to hot extrusion [J].
Ozer, Alpay .
MATERIALS CHEMISTRY AND PHYSICS, 2016, 183 :288-296
[22]   Graphene nanoplatelets reinforced aluminum alloy matrix composites produced by spark plasma sintering [J].
Puchy, V ;
Podobova, M. ;
Dzunda, R. ;
Hvizdos, P. ;
Velgosova, O. ;
Besterci, M. ;
Ballokova, B. .
KOVOVE MATERIALY-METALLIC MATERIALS, 2021, 59 (04) :237-244
[23]   Mechanical and tribological properties of TiB2-Ti composites prepared by spark plasma sintering [J].
Puchy, V ;
Kovacik, J. ;
Kovalcikova, A. ;
Sedlak, R. ;
Dzunda, R. ;
Dusza, J. ;
Falat, L. ;
Podobova, M. ;
Besterci, M. ;
Hvizdos, P. .
KOVOVE MATERIALY-METALLIC MATERIALS, 2019, 57 (06) :435-442
[24]  
Rudianto H, 2011, REV ADV MATER SCI, V28, P145
[25]   Spark Plasma Sintering of Metals and Metal Matrix Nanocomposites: A Review [J].
Saheb, Nouari ;
Iqbal, Zafar ;
Khalil, Abdullah ;
Hakeem, Abbas Saeed ;
Al Aqeeli, Nasser ;
Laoui, Tahar ;
Al-Qutub, Amro ;
Kirchner, Rene .
JOURNAL OF NANOMATERIALS, 2012, 2012
[26]   Influence of characteristic eutectic free microstructure on mechanical and corrosion response of spark plasma sintered hypereutectic Al-Si alloy [J].
Saravanan, T. T. ;
Kamaraj, M. ;
Sharma, S. C. ;
Anoop, S. ;
Manwatkar, Sushant K. ;
Ravikanth, K., V ;
Venugopal, A. ;
Kumaran, S. .
MATERIALS LETTERS, 2022, 308
[27]   Spark plasma sintering of alumina [J].
Shen, ZJ ;
Johnsson, M ;
Zhao, Z ;
Nygren, M .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2002, 85 (08) :1921-1927
[28]   Effects of processing conditions on the sintering response of hypereutectic Al-Si-Cu-Mg P/M alloys [J].
Su, S. S. ;
Chang, I. T. H. ;
Kuo, W. C. H. .
MATERIALS CHEMISTRY AND PHYSICS, 2013, 139 (2-3) :775-782
[29]   Microstructural and mechanical characteristics of in situ metal matrix composites [J].
Tjong, SC ;
Ma, ZY .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2000, 29 (3-4) :49-113
[30]   Comparative evaluation of densification and grain size of ZnO powder compacts during microwave and pressureless spark plasma sintering [J].
Yamanoglu, R. ;
Bradbury, W. L. ;
Olevsky, E. A. ;
German, R. M. .
ADVANCES IN APPLIED CERAMICS, 2012, 111 (07) :422-426
1234