Modeling a radiant floor system with Phase Change Material (PCM) integrated into a building simulation tool: Analysis of a case study of a floor heating system coupled to a heat pump

被引:121
|
作者
Mazo, Javier [1 ]
Delgado, Monica [1 ]
Marin, Jose Maria [1 ]
Zalba, Belen [1 ]
机构
[1] Univ Zaragoza, Aragon Inst Engn Res I3A, Thermal Engn & Energy Syst Grp, Zaragoza 50018, Spain
关键词
Phase change material; Thermal energy storage; Floor heating; Theoretical model; THERMAL-ENERGY STORAGE; MPCM SLURRY; VALIDATION; COMPONENTS; PROGRAM; PLATES;
D O I
10.1016/j.enbuild.2011.12.022
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This work describes a model developed to simulate a radiant floor system with PCM in simple building types. The building simulation model has been validated by comparing its behavior with Energy Plus. The PCM radiant floor model is based on a one-dimensional finite difference scheme where the effective capacity method is used for PCM simulation. Some adjustments have been made to this one-dimensional scheme so that the thermal effect of two-dimensional heat transfer within the radiant floor slab is taken into account. The results of an analyzed case study are also presented in this paper. Here, the PCM floor heating system is fed by a heat pump which mainly operates during night time, thus reducing the costs of electric energy consumption. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码:458 / 466
页数:9
相关论文
共 50 条
  • [21] Numerical study on ground source heat pump integrated with phase change material cooling storage system in office building
    Zhu, Na
    Hu, Pingfang
    Lei, Yu
    Jiang, Zhangning
    Lei, Fei
    APPLIED THERMAL ENGINEERING, 2015, 87 : 615 - 623
  • [23] Analysis of Thermal Performance and Energy Saving Potential by PCM Radiant Floor Heating System based on Wet Construction Method and Hot Water
    Baek, Sanghoon
    Kim, Sangchul
    ENERGIES, 2019, 12 (05):
  • [24] Phase change material (PCM) based thermal management system for cool energy storage application in building: An experimental study
    Tyagi, V. V.
    Buddhi, D.
    Kothari, Richa
    Tyagi, S. K.
    ENERGY AND BUILDINGS, 2012, 51 : 248 - 254
  • [25] Performance analysis of a cascade PCM heat exchanger and two-phase closed thermosiphon: A case study of geothermal district heating system
    Hassanpour, Ammar
    Borji, Mehdi
    Ziapour, Behrooz M.
    Kazemi, Admin
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2020, 40 (40)
  • [26] Modeling and simulation of thermal performance of under-floor electric heating system with shape-stabilized PCM thermal energy storage plate
    Lin, KP
    Zhang, YP
    ENERGY AND ENVIRONMENT, VOLS 1 AND 2, 2003, : 1069 - 1074
  • [27] Experimental Study on Air Source Heat Pump Heating System Based on Phase Change Heat Storage
    Guo, Jianhong
    Yu, Jinxiang
    Wang, Yibo
    Zhang, Xiaoyu
    IEEE ACCESS, 2023, 11 : 110878 - 110887
  • [28] Phase change materials (PCM) as a passive system in the opaque building envelope: A simulation-based analysis
    Aghoei, Mojtaba Mousazadeh
    Astanbous, Atieh
    Khaksar, Reza Yeganeh
    Moezzi, Reza
    Behzadian, Kourosh
    Annuk, Andres
    Gheibi, Mohammad
    JOURNAL OF ENERGY STORAGE, 2024, 101
  • [29] Experimental Study on Phase Change Material with Solar Heater System for Building Heating
    Han, Haijun
    Zhou, Hongyan
    Dong, Ouyang
    Ma, Junjie
    COATINGS, 2022, 12 (10)
  • [30] Thermal performance of phase change material energy storage floor for active solar water-heating system
    Zeng R.
    Wang X.
    Xiao W.
    Zhang Y.
    Zhang Q.
    Di H.
    Frontiers of Energy and Power Engineering in China, 2010, 4 (2): : 185 - 191