Study of the microstructures and mechanical properties of ZK61 magnesium alloy cylindrical parts with inner ribs formed by hot power spinning

被引:29
作者
Yuan, Shuai [1 ]
Xia, Qinxiang [1 ]
Long, Jinchuan [1 ]
Xiao, Gangfeng [1 ]
Cheng, Xiuquan [2 ]
机构
[1] South China Univ Technol, Sch Mech & Automot Engn, Guangzhou 510640, Peoples R China
[2] Guangzhou Civil Aviat Coll, Sch Aircraft Maintenance Engn, Guangzhou 510403, Peoples R China
基金
中国国家自然科学基金;
关键词
ZK61 magnesium alloy; Cylindrical parts with inner ribs; Hot power spinning; Microstructure; Texture; Mechanical properties; BEHAVIOR; ANISOTROPY; AZ31B; EXTRUSION; TENSION;
D O I
10.1007/s00170-020-06091-2
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
Cylindrical parts with inner ribs (CPIR) of magnesium alloy have increasingly become a research focus to adapt the continuous improvement of lightweight requirement. The hot power spinning (HPS) method was proposed to form the magnesium alloy CPIR, and the microstructures, textures, and mechanical properties of blank and spun workpiece at cylindrical wall (CW) and inner rib (IR) were analyzed experimentally. The results show that the average grain size at CW and IR of spun workpiece is refined from 2.49 mu m of blank to 1.88 mu m and 2.11 mu m, respectively. Thec-axis of most grains at CW and IR of spun workpiece is deflected from tangential direction (TD) to radial direction (RD) by 90 degrees and 72 degrees, respectively. Compared with blank, the elongation at CW and IR of spun workpiece is increased by 52.2% and 39.8%, respectively. The yield strength and ultimate tensile strength of IR are basically the same as those of blank, while those of CW are decreased by 6.5% and 3.9%, respectively. The difference of macro fracture directions of tensile specimen of blank and spun workpiece is resulted from the change of grainsc-axis direction and the increase of grain freedom degree aroundc-axis.
引用
收藏
页码:851 / 860
页数:10
相关论文
共 37 条
  • [21] Effect of forging on the low cycle fatigue behavior of cast AZ31B alloy
    Toscano, D.
    Shaha, S. K.
    Behravesh, B.
    Jahed, H.
    Williams, B.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 706 : 342 - 356
  • [22] Anisotropy of dynamic behavior of extruded AZ31 magnesium alloy
    Wan, G.
    Wu, B. L.
    Zhang, Y. D.
    Sha, G. Y.
    Esling, C.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (12): : 2915 - 2924
  • [23] Size effects on flow stress behavior during electrically-assisted micro-tension in a magnesium alloy AZ31
    Wang, Xinwei
    Xu, Jie
    Jiang, Zilin
    Zhu, Wu-Le
    Shan, Debin
    Guo, Bin
    Cao, Jian
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 659 : 215 - 224
  • [24] Xia Q, 2019, P NUMIFORM 2019 13 I, P613
  • [25] Research on the microstructure evolution of Ni-based superalloy cylindrical parts during hot power spinning
    Xia, Qin-Xiang
    Long, Jin-Chuan
    Zhu, Ning-Yuan
    Xiao, Gang-Feng
    [J]. ADVANCES IN MANUFACTURING, 2019, 7 (01) : 52 - 63
  • [26] The classification and a review of hot power spinning of difficult-to-deform metals
    Xia, Qinxiang
    Zhu, Ningyuan
    Cheng, Xiuquan
    Xiao, Gangfeng
    [J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2017, 54 (1-3) : 212 - 235
  • [27] A study of manufacturing tubes with nano/ultrafine grain structure by stagger spinning
    Xia, Qinxiang
    Xiao, Gangfeng
    Long, Hui
    Cheng, Xiuquan
    Yang, Baojian
    [J]. MATERIALS & DESIGN, 2014, 59 : 516 - 523
  • [28] Research on precise control of microstructure and mechanical properties of Ni-based superalloy cylindrical parts during hot backward flow spinning
    Xiao, Gangfeng
    Zhu, Ningyuan
    Long, Jinchuan
    Xia, Qinxiang
    Chen, Weiping
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2018, 34 : 140 - 147
  • [29] Research on the forming quality and mechanical properties of cylindrical spun parts with ultrafine-grained structure during power spinning
    Xiao, Gangfeng
    Xia, Qinxiang
    Long, Jinchuan
    Chen, Weiping
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 97 (5-8) : 2979 - 2986
  • [30] New forming method of manufacturing cylindrical parts with nano/ultrafine grained structures by power spinning based on small plastic strains
    Xiao GangFeng
    Xia QinXiang
    Cheng XiuQuan
    Long Hui
    [J]. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2016, 59 (11) : 1656 - 1665