Optimization of gas tungsten arc welding process by response surface methodology

被引：56

作者：

Kiaee, N. ^{[1
]}

Aghaie-Khafri, M. ^{[1
]}

机构：

[1] KN Toosi Univ Technol, Fac Mech Engn, Tehran 1999143344, Iran

来源：

MATERIALS & DESIGN | 2014年 / 54卷

关键词：

PROCESS PARAMETERS; MECHANICAL-PROPERTIES; STEEL;

D O I：

10.1016/j.matdes.2013.08.032

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Gas tungsten arc welding is widely used for connecting of boiler parts made of A516-Gr70 carbon steel. In this study important process parameters namely current, welding speed and shielding gas flow rate were optimized using response surface methodology (RSM). The simultaneous effects of these parameters on tensile strength and hardness were also evaluated. Applying RSM, simultaneous effects of welding parameters on tensile strength and hardness were obtained through two separate equations. Moreover, optimized values of welding process parameters to achieve desired mechanical properties were evaluated. Desired tensile strength and hardness were achieved at optimum current of 130 A, welding speed of 9.4 cm/min and gas flow rate of 15.1 l/min. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：25 / 31

页数：7

共 21 条

[1] Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology [J].

Acherjee, Bappa ;

Misra, Dipten ;

Bose, Dipankar ;

Venkadeshwaran, K. .

OPTICS AND LASER TECHNOLOGY, 2009, 41 (08) :956-967

[2]

[Anonymous], 2008, WELD BRAZ QUAL

[3]

[Anonymous], 2008, RUL CONSTR PRESS VES

[4]

[Anonymous], 2008, NOND EX

[5]

[Anonymous], 2014, DESIGN EXPT ENG SCI

[6] Corrosion behavior of pulsed gas tungsten arc weldments in power plant carbon steel [J].

Babu, S. P. Kumaresh ;

Natarajan, S. .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2007, 16 (05) :620-625

[7] Comparison between genetic algorithms and response surface methodology in GMAW welding optimization [J].

Correia, DS ;

Gonçalves, CV ;

da Cunha, SS ;

Ferraresi, VA .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 160 (01) :70-76

[8] The effect of microstructure on hardness and toughness of low carbon welded steel using inert gas welding [J].

Gharibshahiyan, Ehsan ;

Raouf, Abbas Honarbakhsh ;

Parvin, Nader ;

Rahimian, Mehdi .

MATERIALS & DESIGN, 2011, 32 (04) :2042-2048

[9] Application of response surface methodology for predicting weld bead quality in submerged are welding of pipes [J].

Gunaraj, V ;

Murugan, N .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 88 (1-3) :266-275

[10]

Honarbakhsh-Raouf A., 2010, INDIAN J SCI TECHNOL, V3, P588

← 1 2 3 →