Fracture Characteristics of B1500HS Steel Hot Blank Parts

Warm and hot blanking processes were developed for solving problems in piercing and trimming of press-hardened parts, some fine blank parts with comprehensive mechanical properties could be produced by hot blanking. To establish the optimum blanking processes and evaluate the effect of blanking temperature on the sheared section surface and fracture direction. Along with the fracture mechanism and microstructure of the parts, a series of hot blanking experiments for B1500HS steels were carried out at different blanking temperatures (450-800A degrees C) and an 8% die clearance. The experimental results show that with the blanking temperature, the smooth (burnish) zone width increases, and the fracture direction becomes nearly normal. The sheared section surface of the parts mainly demonstrates ductile fracture mainly, accompanied by local brittle fracture over the blanking temperature range of 450-600A degrees C. A ductile fracture region contains a great amount of fine equiaxed dimples over the blanking temperature range of 650-800A degrees C, their microstructure is of complete martensite.