Diagnostic Systems as Basis for Technological Improvement

被引：59

作者：

Grigoriev, Sergey N. ^{[1
]}

Kozochkin, Michael P. ^{[2
]}

Sabirov, Fan S. ^{[2
]}

Kutin, Andrey A. ^{[3
]}

机构：

[1] State Technol Univ STANKIN, Dept High Effect Machining Technol, Moscow 127994, Russia

[2] State Technol Univ STANKIN, Dept Machine Tools, Moscow 127994, Russia

[3] Moscow State Technol Univ STANKIN, Dept Mech Engn Technol, Moscow 127994, Russia

来源：

FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 | 2012年 / 1卷

关键词：

diagnostic systems; cutting process; tool; vibroacoustic signal;

D O I：

10.1016/j.procir.2012.05.006

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hereunder the ways of technical diagnostics in metal manufacturing and peculiarities of challenges which are faced in technical diagnostics are given. The matters of the ways of technical diagnostics, which are required to be solved in near future, are described in the article. Solutions of problems concerning diagnostics of condition of an edge tool, using real-time vibration analysis, are provided. The article says about affect of bearings of spindle units on three-dimensional distribution of vibration parameters. An example concerning a spindle unit that induces auto vibration, which produce a false diagnosis regarding the condition of the edge tool, is given. (C) 2012 Published by Elsevier B.V. Selection and/or peer-review under responsibility of Professor Konrad Wegener Konrad Wegener

引用

页码：599 / 604

页数：6

共 13 条

[1] Chatter stability of metal cutting and grinding [J].

Altintas, Y ;

Weck, M .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (02) :619-642

[2] High speed contouring control strategy for five-axis machine tools [J].

Altintas, Y. ;

Sencer, B. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2010, 59 (01) :417-420

[3]

Grigor'ev S. N., 2010, VESTN MGTU STANKIN, P27

[4] MEASUREMENT PROBLEMS IN TECHNOLOGICAL SHAPING PROCESSES [J].

Grigoriev, S. N. ;

Teleshevskii, V. I. .

MEASUREMENT TECHNIQUES, 2011, 54 (07) :744-749

[5]

Grigoryev S.N., 2011, DIANOSTICS COMPUTER

[6] MEASUREMENT OF THE DYNAMIC CHARACTERISTICS OF MACHINE TOOLS BY A PULSE LOADING METHOD [J].

Kochinev, N. A. ;

Sabirov, F. S. .

MEASUREMENT TECHNIQUES, 2009, 52 (06) :621-625

[7] Diagnostics and monitoring of complex production processes using measurement of vibration-acoustic signals [J].

Kozochkin, M. P. ;

Kochinev, N. A. ;

Sabirov, F. S. .

MEASUREMENT TECHNIQUES, 2006, 49 (07) :672-678

[8] Attractors in cutting and their future use in diagnostics [J].

Kozochkin, M. P. ;

Sabirov, F. S. .

MEASUREMENT TECHNIQUES, 2009, 52 (02) :166-171

[9]

Kozochkin M.P., 1988, VIBRO ACOUSTIC DIAGN, P16

[10]

Kozochkin M.P., 2009, ENG RES, V29, P827

← 1 2 →