Effect of heat treatment conditions on the plastic deformation behavior of the Inconel 706 alloy

被引：6
作者：
Kim, Hyogeon [1 ,2 ]
Oh, Hojun [1 ]
Bae, Hyo Ju [1 ]
Sung, Hyokyung [1 ]
Taleghani, Firooz [3 ]
Yoon, Eun Yoo [2 ]
Seol, Jae Bok [1 ]
Kim, Sangshik [1 ]
Kim, Jung Gi [1 ]
机构：
[1] Gyeongsang Natl Univ, Dept Mat Engn & Convergence Technol, Ctr K Met, Jinju 52828, South Korea
[2] Korea Inst Mat Sci, Chang Won 51508, South Korea
[3] Lockheed Martin Global Inc, Sacheon 52529, South Korea
来源：
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2022年 / 21卷
基金：
新加坡国家研究基金会;
关键词：
Inconel alloy; Mechanical property; Microstructure; Plastic deformation; SHORT-RANGE ORDER; PRECIPITATION BEHAVIOR; MECHANICAL-PROPERTIES; CREEP; MICROSTRUCTURE; MACHINABILITY; STABILITY; FRACTURE; FATIGUE; FLOW;
D O I：
10.1016/j.jmrt.2022.10.058
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Although the Inconel 706 alloy has been developed to reduce the manufacturing cost for mass production, the effect of post-heat treatment on the deformation mechanisms of this alloy system has not been well investigated yet. In this study, the effect of heat treatment conditions on the plastic deformation behavior of the Inconel 706 alloy was analyzed. The size of the coherent y'/y" co-precipitates in the sample subjected to 3-step aging (3STEP) is larger than that in the sample subjected to 2-step aging (2STEP). However, the yield strength of 3STEP is lower than that of 2STEP due to the precipitate-free zone near its 1 phase which reduces the volume fraction of the y'/y" co-precipitates. The coarsened 1 phase in 3STEP also acts as a crack initiation site, inducing intergranular fracture. Mean-while, serrated flows were observed in the tensile stress-strain curve of 2STEP tested at a high temperature condition, which resulted in ductility degradation. The present result indicates that the different heat treatment conditions for the Inconel 706 alloy affect the morphology of the precipitate in the matrix, which can be attributed to their deformation behaviors.(c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
引用
收藏
页码：2145 / 2155
页数：11
相关论文
共 55 条
[1]  
[Anonymous], 2009, E8E8M09 ASTM INT
[2]   Machinability of nickel-based high temperature alloys [J].
Arunachalam, R ;
Mannan, MA .
MACHINING SCIENCE AND TECHNOLOGY, 2000, 4 (01) :127-168
[3]  
Asgar M, 2020, Solid State Technol, V63, P11707
[4]   Hydrogen-induced ordering on the deformation mechanism of the as-cast high-Mn steel [J].
Bae, Donghwa ;
Lee, Jungsub ;
Jeong, Jonghyun ;
Seol, Jae Bok ;
Sung, Hyokyung ;
Kim, Jung Gi .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 825
[5]   Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD [J].
Calcagnotto, Marion ;
Ponge, Dirk ;
Demir, Eralp ;
Raabe, Dierk .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (10-11) :2738-2746
[6]   Creep Failure and Damage Mechanism of Inconel 718 Alloy at 800-900 °C [J].
Chen, Kai ;
Dong, Jianxin ;
Yao, Zhihao .
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (05) :970-984
[7]   Dependence of creep fracture of Inconel 718 on grain boundary precipitates [J].
Chen, W ;
Chaturvedi, MC .
ACTA MATERIALIA, 1997, 45 (07) :2735-2746
[8]   Direct observation of chemical short-range order in a medium-entropy alloy [J].
Chen, Xuefei ;
Wang, Qi ;
Cheng, Zhiying ;
Zhu, Mingliu ;
Zhou, Hao ;
Jiang, Ping ;
Zhou, Lingling ;
Xue, Qiqi ;
Yuan, Fuping ;
Zhu, Jing ;
Wu, Xiaolei ;
Ma, En .
NATURE, 2021, 592 (7856) :712-+
[9]   Fatigue and crack growth behavior of Inconel 718-AL6XN dissimilar welds [J].
Cortes, R. ;
Rodriguez, N. K. ;
Ambriz, R. R. ;
Lopez, V. H. ;
Ruiz, A. ;
Jaramillo, D. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 745 :20-30
[10]   Characterization of precipitation in gradient Inconel 718 superalloy [J].
Ding, Jie ;
Xue, S. ;
Shang, Z. ;
Li, Jin ;
Zhang, Y. ;
Su, R. ;
Niu, T. ;
Wang, H. ;
Zhang, X. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 804
123456